Fujitsu fi-4750L manual Document Quality, Document type, Paper weight, Precautions

Page 47

Document Quality

This section describes the types and weights of paper that the scanner can read and precautions in preparing documents to ensure maximal scanner functioning.

Document type

The recommended paper type for documents is as follows:

Woodfree paper

Plain paper (for example, the paper type specified for XEROX 4024)

When using any other type of paper, test feed a few sheets with the ADF to ensure the paper feeds properly before performing a large-scale reading operation.

Any paper can be used on the flatbed. However, the ground color specification must satisfy the specification described in the Grounding Color Area section.

Paper weight

The paper weight should fall within the following ranges:

• 52 to 127 g/m2 (13.9 to 34 lb), 127g/m2 (34lb) for A8

Precautions

A preliminary document feed test may be necessary to avoid unexpected errors. If document slip or jam in the ADF (JAM error) or double feed occurs frequently, read the documents manually using the flatbed. The following documents may be difficult to read properly using the ADF:

Paper with clips or staples.

Paper written on with wet ink.

Paper without a constant thickness. (like envelopes)

Paper with large rumples or curls. (See the NOTICE on the next page.)

Paper with folds or tears.

Tracing paper.

Coated paper (for example, some paper used for color printing).

Carbon paper.

Paper smaller than A8 (Portrait) size, or larger than A3 or Double Letter.

Materials other than paper (for example, clothes, metal foil, or OHP film).

Photographic paper.

Paper with notches on its side.

Non-rectangular paper.

Very thin paper.

4-2

Image 47
Contents Fi-4750L Image Scanner Fi-4750L Image Scanner Revisions, Disclaimers Page Fujitsu France S.A Fujitsu OfficesPage Preface Conventions Contents Viii Terms Index Checking the Components Units and Assemblies Operator Panel ComponentsChecking the Components Fi-4750L Units and AssembliesUnits Function Assemblies Arrangement Operator PanelName of the button Function Button/LED FunctionCounter Function Counter DisplayOperation status Temporary error Alarm Page Page Installation and Connections Precautions Inspection Repositioning the Shipping Lock Cable Connections Turning the power switch OffConnecting the power cable Connecting the chute cable Connecting the interface cablesMounting the Stacker Setting the Scsi ID and the Scsi Terminator Page Operating Instruction Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting ADF Loading Documents on the ADFABD Documents Guide Guide lever Both sides Max 20 mm 0.8 or 10 mm 0.4 See Notices Loading Documents on the Flatbed Scanner parts involved when loading documentsReading a Page from a Thick Book Page ADF Document Specification Fi-4750L A3/Double Letter A8 Portrait Document SizeScanner Maximum Minimum Document type Paper weightPrecautions Document QualityMore than 30 mm Less than Feed direction Top of the paper Country Unit Conversion ADF Document Feeder CapacityAreas that must not be perforated Areas not to be PerforatedGrounding color area Grounding Color AreasDouble Feed Detection Condition Job separation sheet Job Separation SheetScanner Specifications Specification Remarks Basic Product SpecificationSpecification Installation SpecificationDimensions Page Consumables Options Video Interface Option IPC-4D Option Consumables and OptionsConsumables Name Specification RemarksName Remarks OptionsVideo Interface Option How to Install the Video Interface Option BoardPage Parameter Description Without IPC With IPC-4D Description OptionParameter Description IPC-4D Option Page Activating the Setup Mode Contents of the Setup Mode Setup ModeActivating the Setup Mode Contents of the Setup Mode Scsi ID Setting double feed detection Paper Thickness Setting double feed detection Paper Length Setting IPC pre-set mode Setting the pick start time Reset of the abrasion counterSetting the time-out limit Page IPC Status Display Scsi ID SettingScsi Terminator Setting Low Power Mode Setting Select Interface M4097D Display the TPS Board ID NumberSelect Built-In/IPC-4D Image Processing Image ProcessingAdjust ADF Erasing Edges Adjust FB Erasing Edges Page Glossary of Terms Double Letter Size IPC-4D Paper JAM TPS GL-6 Index Pick start time Declarations of Conformity DE-2