CAUTION
As there is always a slight chance that a document may be damaged when using the ADF, important original documents should never be fed through the ADF. Instead, read them manually in flatbed mode.
NOTICES
1.When scanning a translucent document, set the density to light mode.
2.Carbonless papers have a chemical composition that damages the Pad and Pick roller. Therefore, note the following:
Cleaning: | If mispicks occur frequently, clean the Pad and Pick roller in accordance with |
| the “Cleaning and Maintenance” manual. |
Replacement of parts: | The life of the Pad and Pick roller may be shorter than if PPC paper |
| documents are fed. |
3.The leading edge of all documents fed using the ADF should be straightened so the curl of the paper meets the specifications shown below:
More than |
| More than |
30 mm |
| 30 mm |
Less than | Feed direction | Feed direction |
| ||
3 mm | Less than |
|
|
| |
| 5 mm |
|
Top of the paper | Read surface |
|
Top of the paper | Read surface | |
|
|
