Contents |
|
Your Edition X103 SFF | 1 |
Notational conventions | 1 |
Important notes | 3 |
Safety notes | 3 |
Transporting the device | 3 |
Cleaning the device | 3 |
Energy saving, disposal and recycling | 4 |
CE marking | 4 |
Preparing for use | 5 |
Unpacking and checking the delivery | 5 |
Steps for initial setup | 5 |
Setting up the device | 6 |
Vertical operating position | 7 |
Horizontal operating position with rubber feet | 8 |
Connect the monitor, mouse and keyboard | 8 |
Connecting the monitor | 9 |
Connecting the mouse | 9 |
Connecting a keyboard | 9 |
Connecting the device to the mains voltage | 10 |
Initial | 10 |
Switching on monitor and device | 11 |
Installing the software | 11 |
Connecting external devices | 11 |
Ports provided by the device | 12 |
Connecting external devices to the parallel or serial port | 13 |
Connecting external devices to the USB ports | 13 |
Operation | 15 |
Switching the device on | 15 |
Switching off the device | 15 |
Indicators provided by the device | 16 |
Keyboard | 17 |
Important keys and key combinations | 17 |
Working with floppy disks | 19 |
Settings in BIOS Setup | 19 |
Troubleshooting and tips | 21 |
Installing new software | 21 |
21 | |
The device cannot be switched off with the ON/OFF switch | 22 |
The screen stays blank | 22 |
No mouse pointer displayed on the screen | 23 |
The floppy disk cannot be read or written | 23 |
Time and/or date is not correct | 24 |
Error messages on the screen | 24 |
Restoring the hard disk contents | 24 |
Tips | 24 |