Preparing for use
Switching on monitor and device
►Switch the monitor on (see the operating manual for the monitor).
►Switch the device on. To do this, follow the instructions below.
1
1 = ON/OFF switch
►Press the ON/OFF switch on the front of the device.
The
Installing the software
►During installation, follow the instructions on screen.
►Consult the operating system manual if there is anything unclear about the requested input data.
i | You will find further information about the system, drivers, utilities, and updates on the |
"Drivers & Utilities" CD supplied. |
Connecting external devices
Read the documentation on the external device before connecting it.
! With the exception of USB devices, always remove all power plugs before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself. Connect and disconnect the cables in the order described below.
Connecting cables
►Turn off all power and equipment switches.
►Remove all power plugs from the grounded mains outlets.
►Plug all cables into the device and peripherals. You must observe the information provided in the "Important notes" chapter.
►Plug all data communication cables into the utility sockets.
►Plug all power cables into the grounded mains outlets.
11 |