Cisco Systems 7507 quick start Connect the Console and the Auxiliary Y-Cables

Connect the RSP

Connect the Console and the Auxiliary Y-Cables

sole terminal

CONSOLE

CONSOLE

DB-25

Consol

to cons

RSPs in

DB-25

H9720

external

y equipment

AUXILIARY

AUXILIARY

DB-25 fe

Auxiliary to auxili RSPs in

DB-25 fe

H9721

16

The console and auxiliary Y-cables allow you to simultaneously connect the console or auxiliary ports on two RSP2s, RSP4s, or RSP8s, to a single console terminal, or external auxiliary device. These are configured as system master and slave in slots 2 and 3 in the Cisco 7507.

Step 1 Connect the DB-25 female end of the Y-cable to the console terminal device.

Step 2 Connect one DB-25 male end of the Y-cable to an RSP or other external auxiliary device.

Step 3 Repeat Step 2 for the other RSP or other external device.

Step 1 Connect the DB-25 male end of the Y-cable to the external auxiliary equipment.

Step 2 Connect one DB-25 female end of the Y-cable to auxiliary ports on an RSP in an RSP slot.

Step 3 Repeat Step 2 for the auxiliary ports on a second RSP in an RSP slot.

Step 4 Connect the interface processors or VIPs to the external network. Refer to the appropriate processor module manual, such as the Route Switch Processor (RSP4/4+) Installation and Configuration Guide.