Cisco Systems 7507 quick start Install Field Replaceable Units FRUs, Flash Memory Cards

Page 26

24

Install Field Replaceable Units (FRUs)

Flash Memory Cards

NORMAL

A

SLOTSLOT	1
0
SLAVEMASTER

NORMAL

B

SLOTSLOT	1
0
SLAVEMASTER

NORMAL

C

SLOTSLOT	1
0
SLAVEMASTER

57002

A Flash memory card that ships with your Cisco 7507 contains the Cisco IOS software image to boot your router. You do not need to format it.

Image 26

Contents Quick Start Guide Page Install the Hardware Packing ListPrepare to Install the Router For rack-mounting optionalInstall the Router Rack-Mount the Router Optional GrommetsMount Brackets to the Rack Posts Secure the Spacers StepAttach the Chassis Ears Mount the Chassis in the Rack Remove the Chassis Foot Install Interface Processors, Fillers, VIPs, or RSPs Install Power Supplies in the Router Page Install the DC-Input Power Supply On terminal block coverPage Connect the RSP Connect the Console and the Auxiliary Y-Cables Start and Conﬁgure the System Start a Basic Conﬁguration Perform a Basic Conﬁguration Using Setup At the # prompt, enter the copy Conﬁgure an Ethernet Interface Hostname# copy running-config startup-config Perform a Basic Conﬁguration Using Conﬁguration Mode Install Field Replaceable Units FRUs Flash Memory CardsPage Format a Flash Memory Card Copy Files to Flash MemoryMake a Flash Memory Card Image Bootable Enable Booting from Flash MemoryPrepare to Remove and Install an RSP Stop Check the RSP Installation Check the Interface Processor or VIP Installation Copy the Conﬁguration File for an RSP Router# copy startup-config tftp Writing Router-confg Retrieve the Conﬁguration File for RSPs Systemrunning-conﬁg Nvramstartup-conﬁg command Remove and Install Port Adapters Page Remove and Replace the Power Supply H2530 Headquarters