Cisco Systems OL-4858-07 manual Command Reference

Page 1

C H A P T E R 6

Command Reference

This chapter lists new and revised commands specific to the MWAM configuration. The commands are categorized according to the console from which they are executed.

Supervisor Console Commands

The following commands are available at the Supervisor console:

•mwam module allowed-vlan

•mwam module vlan-based

•session slot

•show mwam module

•mwam bootflash access

•execute-on

•logging listen mwam

•mwam module cpu logging

•show logging

•clear logging slot

Multiprocessor WAN Application Module User Guide

	OL-4858-07	6-1

Image 1

Contents Following commands are available at the Supervisor console Command ReferenceFollowing commands are available at the Mwam console Processor Control CommandsGlobal configuration Command Modes Command HistoryMwam module allowed-vlan ReleaseModificationModule Port Vlan-based Mwam module vlan-basedMwam Module Port Vlan-based 12.29ZA This command was introduced Exec modeSession slot Usage Guidelines2003 Show mwam module Following example illustrates the show mwam module commandSup-7606#sho mwam mod 7 port 1 state Sup-7606#sho mwam mod 7 port 1 trafficSup-7606#sho mwam mod 7 port 3 state Multiprocessor WAN Application Module User Guide OL-4858-07 Defaults Command Modes Command History Mwam bootflash accessConfiguration Sup-7606config#mwam bootflash accessThere are no default behavior or values Syntax Description DefaultsOn the MWAM, you have configured processor 2 as follows Logging listen mwam40-10000 Mwam Processor Base UDP PortAdditional UDP Port 40-10002 40-10003 40-10004 40-10005 40-10006There are no default behavior or values Privileged Exec Defaults Command Modes Command History Usage GuidelinesExecute-on Release ModificationSup-7600#execute-on 5 2 log show running-config Connection, use the show line linenumber commandSlot Mwam module cpu logging Sup-7600config#mwam module all cpu all logging errorSup-7600config#mwam module 5 cpu 2 logging debug Release Modification Show loggingCommand Reference Command Details Router# clear logging slot 6 counts Clear logging slotCounter Description Show processorRoot@mwam-9# Following examples illustrate the show log command Shows the upgrade logShow log Shows the Mwam and process restart logReload Root@mwam-9#recover-ios Recover-iosFollowing example illustrates the normal-ioscommand 12.9ZA This command was introducedNormal-ios Following example illustrates the show images command Use this command to list the image names on the MwamShow images Following example illustrates the restore command RestoreFollowing example illustrates the show tech-supportcommand Reporting a problemShow tech-support Root@mwam-4#show tech-supportShow version Local mode Mwam config-mode12.31aBW This command was introduced Syntax DescriptionShow Mwam Config-mode Show mwam config-modeLogging main-cpu Mwam-6-4config#logging main-cpu 10000 debug Mwam-6-4config#logging main-cpuShow mwam Following examples illustrate the show mwam command0x214800000x214FFFFF 0x0014800000x0014FFFFF OL-4858-07