Cisco Systems OL-4858-07 manual Normal-ios, 12.9ZA This command was introduced

Chapter 6 Command Reference

Command Details

normal-ios

To set the configuration register to boot with a normal configuration, use the normal-ioscommand available at the PC complex (processor 1 on the MWAM).

	normal-ios
Syntax Description	normal-ios	Sets the configuration register to boot with a normal configuration.
Defaults	There are no default behavior or values.

Command Modes

Command History

PC command

ReleaseModification

12.(9)ZA This command was introduced.

Usage Guidelines	Use this command to set the configuration register to boot using the normal startup configuration. This
	command resets the effects of the recover-ioscommand. It is used in Recovering from MWAM
	Processor Lockout.
	Note	You must first establish a session to processor 1 (session slot command).
	The following example illustrates the normal-ioscommand:
Examples
	root@mwam-9#normal-ios
	Base external MAC: "0003.FEAB.9FB6"
	Internet Software Consortium DHCP Server V3.0.1rc6
	Copyright 1995-2001 Internet Software Consortium.
	All rights reserved.
	For info, please visit http://www.isc.org/products/DHCP
	Wrote 0 deleted host decls to leases file.
	Wrote 0 new dynamic host decls to leases file.
	Wrote 0 leases to leases file.
	Listening on LPF/eth0/02:00:00:00:0f:00/128.0.1.0/24
	Sending on		LPF/eth0/02:00:00:00:0f:00/128.0.1.0/24
	Listening on LPF/eth1/02:00:00:00:0f:10/128.0.2.0/24
	Sending on		LPF/eth1/02:00:00:00:0f:10/128.0.2.0/24
	Sending on		Socket/fallback/fallback-net
	root@mwam-9#

Multiprocessor WAN Application Module User Guide

OL-4858-07 6-25