Cisco Systems OL-4858-07 manual Restore, Following example illustrates the restore command

Page 27

Chapter 6 Command Reference

Command Details

restore

To restore the previously loaded IOS image and ROM-Monitor image, use the restore command available at the PC complex (processor 1 on the MWAM).

restore

Syntax Description This command has no arguments or keywords.

Defaults

There are no default behavior or values.

Command Modes

Command History

PC command

ReleaseModification

12.3(5a)B	This command was introduced.

Usage Guidelines Use this command to restore the previously loaded IOS image on the MWAM. You must then reload the MWAM or the individual processors to activate the image. You can revert to the previous image only if you have not rebooted/recycled the MWAM.

Note You must first establish a session to processor 1 (session slot command).

Examples

The following example illustrates the restore command:

root@mwam-9#restoreRestoring image

Restoring configuration files Operation completed successfully root@mwam-9#

Multiprocessor WAN Application Module User Guide

	OL-4858-07	6-27

Image 27

Contents Following commands are available at the Supervisor console Command ReferenceFollowing commands are available at the Mwam console Processor Control CommandsReleaseModification Command Modes Command HistoryGlobal configuration Mwam module allowed-vlanMwam module vlan-based Module Port Vlan-basedMwam Module Port Vlan-based Usage Guidelines Exec mode12.29ZA This command was introduced Session slot2003 Sup-7606#sho mwam mod 7 port 1 traffic Following example illustrates the show mwam module commandShow mwam module Sup-7606#sho mwam mod 7 port 1 stateSup-7606#sho mwam mod 7 port 3 state Multiprocessor WAN Application Module User Guide OL-4858-07 Sup-7606config#mwam bootflash access Mwam bootflash accessDefaults Command Modes Command History ConfigurationLogging listen mwam Syntax Description DefaultsThere are no default behavior or values On the MWAM, you have configured processor 2 as follows40-10002 40-10003 40-10004 40-10005 40-10006 Mwam Processor Base UDP Port40-10000 Additional UDP PortRelease Modification Defaults Command Modes Command History Usage GuidelinesThere are no default behavior or values Privileged Exec Execute-onConnection, use the show line linenumber command Sup-7600#execute-on 5 2 log show running-configSlot Mwam module cpu logging Sup-7600config#mwam module all cpu all logging errorSup-7600config#mwam module 5 cpu 2 logging debug Release Modification Show loggingCommand Reference Command Details Router# clear logging slot 6 counts Clear logging slotCounter Description Show processorRoot@mwam-9# Shows the Mwam and process restart log Shows the upgrade logFollowing examples illustrate the show log command Show logReload Root@mwam-9#recover-ios Recover-ios12.9ZA This command was introduced Following example illustrates the normal-ioscommandNormal-ios Use this command to list the image names on the Mwam Following example illustrates the show images commandShow images Following example illustrates the restore command RestoreRoot@mwam-4#show tech-support Reporting a problemFollowing example illustrates the show tech-supportcommand Show tech-supportShow version Syntax Description Mwam config-modeLocal mode 12.31aBW This command was introducedShow Mwam Config-mode Show mwam config-modeLogging main-cpu Mwam-6-4config#logging main-cpu 10000 debug Mwam-6-4config#logging main-cpuShow mwam Following examples illustrate the show mwam command0x214800000x214FFFFF 0x0014800000x0014FFFFF OL-4858-07