Cisco Systems OL-4858-07 manual Mwam bootflash access, Defaults Command Modes Command History

Page 10

Chapter 6 Command Reference

Command Details

mwam bootflash access

Note The MWAM bootflash access must be enabled if you want to operate in Supervisor mode.

To enable file transfer requests between the Supervisor bootflash and the individual processors on the MWAM, use the mwam bootflash access command in configuration mode. To remove this configuration, use the no form of the command.

mwam bootflash access

no mwam bootflash access

Syntax Description		mwam bootflash	Configures bootflash access for MWAM file transfer requests.
		access

		MWAM bootflash access is enabled by default. To disable access, issue no mwam bootflash access.
Defaults

Command Modes

Command History

Configuration

ReleaseModification

12.2(14)ZA4	This command was introduced.

Usage Guidelines Use the no form of this command to disable MWAM access to the Supervisor bootflash.

Examples	The following example illustrates the mwam bootflash access command:
	Sup-7606(config)#mwam bootflash access

Multiprocessor WAN Application Module User Guide

6-10	OL-4858-07

Image 10

Contents Command Reference Following commands are available at the Supervisor consoleProcessor Control Commands Following commands are available at the Mwam consoleMwam module allowed-vlan Command Modes Command HistoryGlobal configuration ReleaseModificationModule Port Vlan-based Mwam module vlan-basedMwam Module Port Vlan-based Session slot Exec mode12.29ZA This command was introduced Usage Guidelines2003 Sup-7606#sho mwam mod 7 port 1 state Following example illustrates the show mwam module commandShow mwam module Sup-7606#sho mwam mod 7 port 1 trafficSup-7606#sho mwam mod 7 port 3 state Multiprocessor WAN Application Module User Guide OL-4858-07 Configuration Mwam bootflash accessDefaults Command Modes Command History Sup-7606config#mwam bootflash accessOn the MWAM, you have configured processor 2 as follows Syntax Description DefaultsThere are no default behavior or values Logging listen mwamAdditional UDP Port Mwam Processor Base UDP Port40-10000 40-10002 40-10003 40-10004 40-10005 40-10006Execute-on Defaults Command Modes Command History Usage GuidelinesThere are no default behavior or values Privileged Exec Release ModificationSup-7600#execute-on 5 2 log show running-config Connection, use the show line linenumber commandSlot Sup-7600config#mwam module all cpu all logging error Mwam module cpu loggingSup-7600config#mwam module 5 cpu 2 logging debug Show logging Release ModificationCommand Reference Command Details Clear logging slot Router# clear logging slot 6 countsShow processor Counter DescriptionRoot@mwam-9# Show log Shows the upgrade logFollowing examples illustrate the show log command Shows the Mwam and process restart logReload Recover-ios Root@mwam-9#recover-iosFollowing example illustrates the normal-ioscommand 12.9ZA This command was introducedNormal-ios Following example illustrates the show images command Use this command to list the image names on the MwamShow images Restore Following example illustrates the restore commandShow tech-support Reporting a problemFollowing example illustrates the show tech-supportcommand Root@mwam-4#show tech-supportShow version 12.31aBW This command was introduced Mwam config-modeLocal mode Syntax DescriptionShow mwam config-mode Show Mwam Config-modeLogging main-cpu Mwam-6-4config#logging main-cpu Mwam-6-4config#logging main-cpu 10000 debugFollowing examples illustrate the show mwam command Show mwam0x214800000x214FFFFF 0x0014800000x0014FFFFF OL-4858-07