Cisco Systems OL-4858-07 manual Show images, Use this command to list the image names on the Mwam

Page 26

Chapter 6 Command Reference

Command Details

show images

To list the images stored on the MWAM, use the show images command available at the PC complex (processor 1 on the MWAM).

show images

Syntax Description This command has no arguments or keywords.

Defaults

There are no default behavior or values.

Command Modes

Command History

PC command

ReleaseModification

12.(9)ZA	This command was introduced.


Usage Guidelines		Use this command to list the image names on the MWAM.

		Note You must first establish a session to processor 1 (session slot command).

		The following example illustrates the show images command:
Examples		The following example illustrates the show images command:
		root@mwam-9#show images
		Device name			Partition#		Image name
	-----------				----------		----------
		Compact flash(cf)			6		SIMPSON_RAM.bin
		Version Information:
		Compiled Tue 19-Aug-03				13:35 by dchih
		Compact flash(cf)			6		svcmwam-js-mz.geo_t_040121
		Version Information:
		Compiled Wed 21-Jan-04				02:34 by $

AP software is c6svcmwam-js-mz.geo_t_040121.2-1-0-3b.6cpu.bin root@mwam-9#

Multiprocessor WAN Application Module User Guide

6-26	OL-4858-07

Image 26

Contents Command Reference Following commands are available at the Supervisor consoleProcessor Control Commands Following commands are available at the Mwam consoleMwam module allowed-vlan Command Modes Command HistoryGlobal configuration ReleaseModificationMwam Module Port Vlan-based Mwam module vlan-basedModule Port Vlan-based Session slot Exec mode12.29ZA This command was introduced Usage Guidelines2003 Sup-7606#sho mwam mod 7 port 1 state Following example illustrates the show mwam module commandShow mwam module Sup-7606#sho mwam mod 7 port 1 trafficSup-7606#sho mwam mod 7 port 3 state Multiprocessor WAN Application Module User Guide OL-4858-07 Configuration Mwam bootflash accessDefaults Command Modes Command History Sup-7606config#mwam bootflash accessOn the MWAM, you have configured processor 2 as follows Syntax Description DefaultsThere are no default behavior or values Logging listen mwamAdditional UDP Port Mwam Processor Base UDP Port40-10000 40-10002 40-10003 40-10004 40-10005 40-10006Execute-on Defaults Command Modes Command History Usage GuidelinesThere are no default behavior or values Privileged Exec Release ModificationSlot Connection, use the show line linenumber commandSup-7600#execute-on 5 2 log show running-config Sup-7600config#mwam module all cpu all logging error Mwam module cpu loggingSup-7600config#mwam module 5 cpu 2 logging debug Show logging Release ModificationCommand Reference Command Details Clear logging slot Router# clear logging slot 6 countsShow processor Counter DescriptionRoot@mwam-9# Show log Shows the upgrade logFollowing examples illustrate the show log command Shows the Mwam and process restart logReload Recover-ios Root@mwam-9#recover-iosNormal-ios 12.9ZA This command was introducedFollowing example illustrates the normal-ioscommand Show images Use this command to list the image names on the MwamFollowing example illustrates the show images command Restore Following example illustrates the restore commandShow tech-support Reporting a problemFollowing example illustrates the show tech-supportcommand Root@mwam-4#show tech-supportShow version 12.31aBW This command was introduced Mwam config-modeLocal mode Syntax DescriptionShow mwam config-mode Show Mwam Config-modeLogging main-cpu Mwam-6-4config#logging main-cpu Mwam-6-4config#logging main-cpu 10000 debugFollowing examples illustrate the show mwam command Show mwam0x214800000x214FFFFF 0x0014800000x0014FFFFF OL-4858-07