Cisco Systems OL-4858-07 manual Processor Control Commands

Page 2

Chapter 6 Command Reference

Processor Control Commands

The Processor Control (PC) commands are available when you session into MWAM processor 1 from the Supervisor console. The PC commands provide various functions for MWAM processors.

To access the PC commands, use the session slot command to establish a connection to processor 1. Then log into the PC as root user with the password cisco.

•show processor

•show log

•show tech-support

•show version

•show images

•reload

•recover-ios

•normal-ios

•restore

MWAM Console Commands

The following commands are available at the MWAM console:

Contents Command Reference Following commands are available at the Supervisor consoleProcessor Control Commands Following commands are available at the Mwam consoleMwam module allowed-vlan Command Modes Command HistoryGlobal configuration ReleaseModificationMwam Module Port Vlan-based Mwam module vlan-basedModule Port Vlan-based Session slot Exec mode12.29ZA This command was introduced Usage Guidelines2003 Sup-7606#sho mwam mod 7 port 1 state Following example illustrates the show mwam module commandShow mwam module Sup-7606#sho mwam mod 7 port 1 trafficSup-7606#sho mwam mod 7 port 3 state Multiprocessor WAN Application Module User Guide OL-4858-07 Configuration Mwam bootflash accessDefaults Command Modes Command History Sup-7606config#mwam bootflash accessOn the MWAM, you have configured processor 2 as follows Syntax Description DefaultsThere are no default behavior or values Logging listen mwamAdditional UDP Port Mwam Processor Base UDP Port40-10000 40-10002 40-10003 40-10004 40-10005 40-10006Execute-on Defaults Command Modes Command History Usage GuidelinesThere are no default behavior or values Privileged Exec Release ModificationSlot Connection, use the show line linenumber commandSup-7600#execute-on 5 2 log show running-config Sup-7600config#mwam module all cpu all logging error Mwam module cpu loggingSup-7600config#mwam module 5 cpu 2 logging debug Show logging Release ModificationCommand Reference Command Details Clear logging slot Router# clear logging slot 6 countsShow processor Counter DescriptionRoot@mwam-9# Show log Shows the upgrade logFollowing examples illustrate the show log command Shows the Mwam and process restart logReload Recover-ios Root@mwam-9#recover-iosNormal-ios 12.9ZA This command was introducedFollowing example illustrates the normal-ioscommand Show images Use this command to list the image names on the MwamFollowing example illustrates the show images command Restore Following example illustrates the restore commandShow tech-support Reporting a problemFollowing example illustrates the show tech-supportcommand Root@mwam-4#show tech-supportShow version 12.31aBW This command was introduced Mwam config-modeLocal mode Syntax DescriptionShow mwam config-mode Show Mwam Config-modeLogging main-cpu Mwam-6-4config#logging main-cpu Mwam-6-4config#logging main-cpu 10000 debugFollowing examples illustrate the show mwam command Show mwam0x214800000x214FFFFF 0x0014800000x0014FFFFF OL-4858-07

Cisco Systems OL-4858-07 manual Processor Control Commands

Processor Control Commands

MWAM Console Commands

The following commands are available at the MWAM console:

•mwam config-mode

•show mwam config-mode

•logging main-cpu

6-2	OL-4858-07