Cisco Systems OL-4858-07 Show tech-support, Reporting a problem, Root@mwam-4#show tech-support

Page 28

Chapter 6 Command Reference

Command Details

show tech-support

To display general information about the MWAM and its processors when it reports a problem, use the show tech-supportcommand available at the PC complex (processor 1 on the MWAM).

show tech-support

Syntax Description This command has no arguments or keywords.

Defaults

There are no default behavior or values.

Command Modes

Command History

PC command

ReleaseModification

12.(9)ZA	This command was introduced.

Usage Guidelines		The show tech-supportcommand from the PC displays the output of a number of show commands. The
		show tech-supportcommand is useful for collecting a large amount of information for troubleshooting
		purposes. The output of this command can be provided to technical support representatives when
		reporting a problem.

		Note You must first establish a session to processor 1 (session slot command).

		The following example illustrates the show tech-supportcommand:
Examples
		root@mwam-4#show tech-support
		--------------------------		show version --------------------------
		SVCMWAM Image version 2.1(1.0)
		Mon Feb 23 01:29:45 EST 2004
		Copyright (c) 2002-2003, 2004 by cisco Systems, Inc.
		All rights reserved.
		~snipped~

Multiprocessor WAN Application Module User Guide

6-28	OL-4858-07

Image 28

Contents Command Reference Following commands are available at the Supervisor consoleProcessor Control Commands Following commands are available at the Mwam consoleCommand Modes Command History Global configurationMwam module allowed-vlan ReleaseModificationModule Port Vlan-based Mwam module vlan-basedMwam Module Port Vlan-based Exec mode 12.29ZA This command was introducedSession slot Usage Guidelines2003 Following example illustrates the show mwam module command Show mwam moduleSup-7606#sho mwam mod 7 port 1 state Sup-7606#sho mwam mod 7 port 1 trafficSup-7606#sho mwam mod 7 port 3 state Multiprocessor WAN Application Module User Guide OL-4858-07 Mwam bootflash access Defaults Command Modes Command HistoryConfiguration Sup-7606config#mwam bootflash accessSyntax Description Defaults There are no default behavior or valuesOn the MWAM, you have configured processor 2 as follows Logging listen mwamMwam Processor Base UDP Port 40-10000Additional UDP Port 40-10002 40-10003 40-10004 40-10005 40-10006Defaults Command Modes Command History Usage Guidelines There are no default behavior or values Privileged ExecExecute-on Release ModificationSup-7600#execute-on 5 2 log show running-config Connection, use the show line linenumber commandSlot Sup-7600config#mwam module all cpu all logging error Mwam module cpu loggingSup-7600config#mwam module 5 cpu 2 logging debug Show logging Release ModificationCommand Reference Command Details Clear logging slot Router# clear logging slot 6 countsShow processor Counter DescriptionRoot@mwam-9# Shows the upgrade log Following examples illustrate the show log commandShow log Shows the Mwam and process restart logReload Recover-ios Root@mwam-9#recover-iosFollowing example illustrates the normal-ioscommand 12.9ZA This command was introducedNormal-ios Following example illustrates the show images command Use this command to list the image names on the MwamShow images Restore Following example illustrates the restore commandReporting a problem Following example illustrates the show tech-supportcommandShow tech-support Root@mwam-4#show tech-supportShow version Mwam config-mode Local mode12.31aBW This command was introduced Syntax DescriptionShow mwam config-mode Show Mwam Config-modeLogging main-cpu Mwam-6-4config#logging main-cpu Mwam-6-4config#logging main-cpu 10000 debugFollowing examples illustrate the show mwam command Show mwam0x214800000x214FFFFF 0x0014800000x0014FFFFF OL-4858-07