Cisco Systems OL-4858-07 manual Show version, Usage Guidelines

Page 29

Chapter 6 Command Reference

Command Details

show version

To display information about the currently loaded software version along with hardware and device information, use the show version command available at the PC complex (processor 1 on the MWAM).

show version

Syntax Description This command has no arguments or keywords.

Defaults

There are no default behavior or values.

Command Modes

Command History

PC command

ReleaseModification

12.(9)ZA	This command was introduced.


Usage Guidelines		The show version command from the PC displays information about the software version currently
		running on the MWAM.

		Note		You must first establish a session to processor 1 (session slot command).

		The following example illustrates the show version command:
Examples		The following example illustrates the show version command:
		root@mwam-4# show version
		SVCMWAM Image version 2.1(1.0)
		Mon Feb 23 01:29:45 EST 2004
		Copyright (c) 2002-2003, 2004 by cisco Systems, Inc.
		All rights reserved.
		AP software is c6svc-5mwam-g4js-bf21_10.123-7.T1
		AP software is based upon Maintenance image version: 3.1(0.2)
		IOS Software is svcmwam-g4js-mz.123-7.T1
		5 Processor Configuration
		Line Card Number :WS-SVC-MWAM-1
		Number of Pentium-class Processors :			1
		BIOS Vendor: Phoenix Technologies Ltd.
		BIOS Version: 4.0-Rel 6.0.4
		Total available memory: 500 MB
		Size of compact flash: 122 MB

root@mwam-4#

Multiprocessor WAN Application Module User Guide

	OL-4858-07	6-29

Image 29

Contents Following commands are available at the Supervisor console Command ReferenceFollowing commands are available at the Mwam console Processor Control CommandsGlobal configuration Command Modes Command HistoryMwam module allowed-vlan ReleaseModificationMwam Module Port Vlan-based Mwam module vlan-basedModule Port Vlan-based 12.29ZA This command was introduced Exec modeSession slot Usage Guidelines2003 Show mwam module Following example illustrates the show mwam module commandSup-7606#sho mwam mod 7 port 1 state Sup-7606#sho mwam mod 7 port 1 trafficSup-7606#sho mwam mod 7 port 3 state Multiprocessor WAN Application Module User Guide OL-4858-07 Defaults Command Modes Command History Mwam bootflash accessConfiguration Sup-7606config#mwam bootflash accessThere are no default behavior or values Syntax Description DefaultsOn the MWAM, you have configured processor 2 as follows Logging listen mwam40-10000 Mwam Processor Base UDP PortAdditional UDP Port 40-10002 40-10003 40-10004 40-10005 40-10006There are no default behavior or values Privileged Exec Defaults Command Modes Command History Usage GuidelinesExecute-on Release ModificationSlot Connection, use the show line linenumber commandSup-7600#execute-on 5 2 log show running-config Mwam module cpu logging Sup-7600config#mwam module all cpu all logging errorSup-7600config#mwam module 5 cpu 2 logging debug Release Modification Show loggingCommand Reference Command Details Router# clear logging slot 6 counts Clear logging slotCounter Description Show processorRoot@mwam-9# Following examples illustrate the show log command Shows the upgrade logShow log Shows the Mwam and process restart logReload Root@mwam-9#recover-ios Recover-iosNormal-ios 12.9ZA This command was introducedFollowing example illustrates the normal-ioscommand Show images Use this command to list the image names on the MwamFollowing example illustrates the show images command Following example illustrates the restore command RestoreFollowing example illustrates the show tech-supportcommand Reporting a problemShow tech-support Root@mwam-4#show tech-supportShow version Local mode Mwam config-mode12.31aBW This command was introduced Syntax DescriptionShow Mwam Config-mode Show mwam config-modeLogging main-cpu Mwam-6-4config#logging main-cpu 10000 debug Mwam-6-4config#logging main-cpuShow mwam Following examples illustrate the show mwam command0x214800000x214FFFFF 0x0014800000x0014FFFFF OL-4858-07