Cisco Systems OL-4858-07 manual Connection, use the show line linenumber command, Slot

Page 14

Chapter 6 Command Reference

Command Details

	To terminate a remote command that is in progress, the user can activate the escape sequence defined on
	the Supervisor console. For example, if a user initiates a log show command on a remote MWAM
	processor and the command execution is longer than expected, the user can terminate the command from
	the Supervisor console by entering Ctrl-^. To determine the escape sequence for your console/vty
	connection, use the show line line_number command.
	The following example executes the log show running-configcommand on processor 2 of the MWAM
Examples
	in slot 5.
	Sup-7600#execute-on 5 2 log show running-config

Multiprocessor WAN Application Module User Guide

6-14	OL-4858-07

Image 14

Contents Command Reference Following commands are available at the Supervisor consoleProcessor Control Commands Following commands are available at the Mwam consoleMwam module allowed-vlan Command Modes Command HistoryGlobal configuration ReleaseModificationMwam Module Port Vlan-based Mwam module vlan-basedModule Port Vlan-based Session slot Exec mode12.29ZA This command was introduced Usage Guidelines2003 Sup-7606#sho mwam mod 7 port 1 state Following example illustrates the show mwam module commandShow mwam module Sup-7606#sho mwam mod 7 port 1 trafficSup-7606#sho mwam mod 7 port 3 state Multiprocessor WAN Application Module User Guide OL-4858-07 Configuration Mwam bootflash accessDefaults Command Modes Command History Sup-7606config#mwam bootflash accessOn the MWAM, you have configured processor 2 as follows Syntax Description DefaultsThere are no default behavior or values Logging listen mwamAdditional UDP Port Mwam Processor Base UDP Port40-10000 40-10002 40-10003 40-10004 40-10005 40-10006Execute-on Defaults Command Modes Command History Usage GuidelinesThere are no default behavior or values Privileged Exec Release ModificationSlot Connection, use the show line linenumber commandSup-7600#execute-on 5 2 log show running-config Sup-7600config#mwam module all cpu all logging error Mwam module cpu loggingSup-7600config#mwam module 5 cpu 2 logging debug Show logging Release ModificationCommand Reference Command Details Clear logging slot Router# clear logging slot 6 countsShow processor Counter DescriptionRoot@mwam-9# Show log Shows the upgrade logFollowing examples illustrate the show log command Shows the Mwam and process restart logReload Recover-ios Root@mwam-9#recover-iosNormal-ios 12.9ZA This command was introducedFollowing example illustrates the normal-ioscommand Show images Use this command to list the image names on the MwamFollowing example illustrates the show images command Restore Following example illustrates the restore commandShow tech-support Reporting a problemFollowing example illustrates the show tech-supportcommand Root@mwam-4#show tech-supportShow version 12.31aBW This command was introduced Mwam config-modeLocal mode Syntax DescriptionShow mwam config-mode Show Mwam Config-modeLogging main-cpu Mwam-6-4config#logging main-cpu Mwam-6-4config#logging main-cpu 10000 debugFollowing examples illustrate the show mwam command Show mwam0x214800000x214FFFFF 0x0014800000x0014FFFFF OL-4858-07

connection, use the show line line_number command.

Examples

in slot 5.

Sup-7600#execute-on 5 2 log show running-config