Chapter 1: Overview
1.1FIRMWARE REVISION
Important Notice
Depending on the firmware version used in the WPIM-T1/DDS, some features described in this document may not be supported. Refer to the Release Notes shipped with the WPIM-T1/DDS to determine which features are supported.
This manual covers Firmware Revision level 02.01.XX. Later revisions may be reflected in an updated manual. Please check carefully to verify the revision level of your device, to ensure that this manual will meet your needs.
1.2WPIM-T1/DDS FEATURES
The WPIM-T1/DDS extends the functionality of the Wide Area Network host platform to provide a full or fractional T1 or a DDS interface for the host platform (CSX400 or the HSIM-W6) into which the WPIM-T1/DDS (Figure 1-1) can be installed.
Figure 1-1 WPIM-T1/DDS
In the T1 service mode, the WPIM-T1/DDS provides a T1 interface that includes a built-in Channel Service Unit/Digital Service Unit (CSU/DSU) for direct connection to a T1 line.
In the DDS service mode, the WPIM-T1/DDS extends the functionality of the Wide Area Network module to allow remote connectivity using Digital Data Service (DDS). It provides a DDS interface that includes a built-in Channel Service Unit/Digital Service Unit (CSU/DSU) for direct connection to a DDS line, and supports remote CSU diagnostic loopback and Non-Latching remote DSU diagnostic loopback.
1-2 | WPIM-T1/DDS User’s Guide |
