Chapter 3: Local Management for T1 Service
CCP Enable (Toggle)
Toggles between On and Off to enable or disable compression.
CCP Status
Displays the status of compression.
Comp Ratio
Displays the Compression Ratio, which is the ratio of uncompressed to compressed data.
3.2.1.3Command and Interface Table Fields
SAVE (Command)
Saves the configuration changes.
PORTS:
Interface table displays the range of circuits shown in the command field. Use the SPACE bar and either the BACKSPACE or DELETE key to step through the displays.
RETURN (Command)
Returns user to the previous screen.
CKT#
Displays the circuit number of the application ports available from the host platform. If the active protocol is PPP or FR PtoP, only one application port per interface number (IF#) is assigned. If the active protocol is FR PtoMP, the available WAN ports from the host platform may be assigned, one per DLCI.
IF#
Displays the MIB II Interface number that is associated with the application port (CKT#).
LID
Displays the Link Identifier. If the active protocol is Frame Relay, the Data Link Connection Identifier is displayed. If the active protocol for this interface is PPP, then PPP displays in this field. For Ethernet ports, Enet is displayed.
STATE
Displays the status of the application port. If the active protocol is Frame Relay, this field displays the status as Active, Inactive, or Invalid
(no LMI). If the active protocol is PPP or Ethernet, this field displays UP (active) or DOWN (inactive).
|