Cabletron Systems T1 manual Refer to -3for the following parameters displayed for PPP

WAN Interface Configuration Screen

4.2.1.2PPP as the Protocol Manager

<host name> Local Management								Flash Image Version: xx.xx.xx
			WAN INTERFACE CONFIGURATION
				CKT# IF#		LID	STATE	CKT# IF# LID STATE
Interface Number:		003		001	001	Enet	UP	017
Max Xmit Unit:		1526
				002	002	Enet	DOWN	018
ProtMgrIface:		[0]		003				019
Active Protocol:		PPP		004				020
PPP MRU:		1520		005				021
				006				022
ECP Enable:		[Off]		007				023
ECP Status:		Off		008				024
				009				025
CCP Enable:		[Off]		010				026
				011				027
CCP Status:		Off
				012				028
Comp Ratio:		1:1
				013				029
				014
	PORTS:							030
SAVE		RETURN		015				031
	[1-32]			016				032

2750_02

Figure 4-3 WAN Interface Configuration Screen (PPP)

Refer to Figure 4-3for the following parameters displayed for PPP.

PPPMRU (Modifiable)

Displays the modifiable Maximum Receive Units that PPP can handle.

ECP Enable (Toggle)

Toggles between On and Off to enable or disable encryption.

ECP Status (Read-Only)

Displays the status of encryption.

CCP Enable (Toggle)

Toggles between On and Off to enable or disable compression.

CCP Status (Read-Only)

Displays the status of compression.

Comp Ratio (Read-Only)

Displays the Compression Ratio, which is the ratio of uncompressed to compressed data.

WPIM-T1/DDS User’s Guide 4-7