Cabletron Systems manual T1 Interface Cabling, Cable Assemblies and Pinouts

Page 60

Appendix A: Speciﬁcations

A.4 T1 INTERFACE CABLING

This appendix provides the Cabletron Systems part number and connector information for the Interface Cables used in both the T1 and DDS modes of the WPIM-T1/DDS.

Table A-1lists Cabletron Systems part numbers for the interface cables for T1 mode. A standard 20-foot cable is available or the customer may specify the length of cable when ordering.

Table A-1 Cabletron T1 Cable Part Numbers

Interface Cable	Cabletron Part Number


T1 Line Interface Cable	9372094-201
	9372094-L2

1.Standard 20 foot T1 Line Interface Cable.

2.(L denotes length required in feet or meters). For example: 9372094-3 denotes a 3 foot cable; 9372094-3M denotes a 3 meter cable.

A.4.1 Cable Assemblies and Pinouts

The following section provides connector information for the T1 interface cable.

Table A-2 T1 Connector Information

Cabletron interface cable part number	9372094

Description	T1 line interface cable

Connector 1	RJ48C

Connector 2	RJ48C

A-2	WPIM-T1/DDS User’s Guide

Image 60

Contents WPIM-T1/DDS User’s Guide Page WPIM-T1/DDS User’s Guide Industry Canada Notice Cabletron SYSTEMS, INC. Program License Agreement United States Government Restricted Rights Declaration of Conformity WPIM-T1/DDS User’s Guide Contents Viii WPIM-T1/DDS User’s Guide Using this Manual IntroductionStructure of this Guide Related Manuals Document Conventions Following conventions are used throughout this documentGetting Help Your email addressChapter Overview WPIM-T1/DDS Features Firmware RevisionImportant Notice WAN Protocols MIB SupportOverview WPIM-T1/DDS User’s Guide Chapter Setup and Installation Installing the WPIM-T1/DDSUnpacking the WPIM-T1/DDS Pre-Installation Installing the WPIM-T1/DDSPost-Installation Installing the WPIM-T1/DDSChoosing T1 or DDS Mode LEDsRequired Operations WAN Conﬁguration Connecting the WAN Cable to the WPIM-T1/DDS WAN Connection to the WPIM-T1/DDSChapter Local Management for T1 Service WAN Physical Configuration Screen Wpim #WAN Physical Conﬁguration Screen Fields Wpim Line Conﬁguration Fields Saves the chosen conﬁgurationWpim Timeslot Conﬁguration Table Sample Timeslot Conﬁguration WAN Interface Configuration Screen ANSI94WAN Interface Conﬁguration Screen Fields Frame Relay as the Protocol ManagerPPP as the Protocol Manager WAN Interface Conﬁguration Screen PPPCommand and Interface Table Fields Full T1 Configuration Using PPP Telco Conﬁguration Information1 T1 Service Physical Conﬁguration 2 T1 Interface Conﬁguration Fractional T1 Configuration Using PPP Fractional T1 Conﬁguration1 T1 Physical Conﬁguration Proceed to the .4.2 to continue configuration Frame Relay Configuration Frame Relay ConﬁgurationFrame Relay Physical Conﬁguration Frame Relay Conﬁguration Frame Relay Interface Conﬁguration Frame Relay Conﬁguration WPIM-T1/DDS User’s Guide Chapter Local Management for DDS Service Local Management for DDS Service Displays conﬁguration information for two different WPIMs Not used for the WPIM-T1/DDS Invalid Refer to -2for the following parameters displayed for FR Refer to -3for the following parameters displayed for PPP Command and Interface Table Fields DDS Service Configuration DDS Service Physical ConﬁgurationDDS Service Interface Conﬁguration EnterDDS Service Conﬁguration WPIM-T1/DDS User’s Guide Appendix a Specifications Physical PropertiesEnvironmental Requirements Regulatory ComplianceT1 Interface Cabling Cable Assemblies and PinoutsT1 Interface Cabling PIN Signal DDS Port AssignmentAppendix B FCC Part 68 USER’S InformationAppendix B FCC Part 68 User’s Information Being duly sworn, state My commission expires