ATTO Technology VT-Class manual Appendix D Sample Zoning Command Sequences, Simple configuration

Appendix D Sample Zoning Command Sequences

First time configuration (after download)

QuickRAID under Zoning “first time” configuration, an all/all/all configuration in the selected QuickRAID configuration. All zone commands except

ZoneCommit affect only the planned configuration. ZoneCommit sets the Planned Configuration into the Active Configuration.

ZoneClearAll	Clears any previously-defined zones
ZoneCommit	Sets the new zoning configuration.

Simple configuration

2 hosts. Hosts can use different operating systems. All zone commands except ZoneCommit affect only the

planned configuration. ZoneCommit sets the Planned Configuration into the Active Configuration.

ZoneClearAll	Clears any previously defined zones from the planned
	configuration.
ZoneCreate zone_1	Creates a zone named zone_1
ZoneAddHost zone_1 20:00:00:10:86:00:01:34	Adds host WWPN to zone_1
ZoneAddDevice zone_1 1 4	Adds LUN 1 and 4 to zone_1
ZoneAddPort zone_1 0	LUN 1 and LUN 4 will be available through HIC 0 for only the host
	in zone_1
ZoneCreate zone_2	Creates a zone named zone_2
ZoneAddHost zone_2 20:00:00:60:00:00:12:34	Adds host WWPN to zone_2
ZoneAddDevice zone_2 7	Adds LUN 7 to zone_2
ZoneAddPort zone_2 1	LUN 7 will be available through HIC 1 for only the host in zone_2
ZoneState zone_1 enabled	Enables zone_1.
ZoneState zone_2 enabled	Enables zone_2.
ZoneCommit	Sets the Planned Zoning Configuration into the Active
	configuration. No other LUNs will be available to any host.

Symmetric Model

1 host, 1 switch. All host ports travel through a switch to both Diamond ports. Zoning is not required, since there is no reason to restrict host/HBA/Port access. All

zone commands except ZoneCommit affect only the planned configuration. ZoneCommit sets the Planned Configuration into the Active Configuration.

ZoneClear all	Clears any previously-defined zones from the planned configuration
ZoneCommit	Copies what is in the Planned Zoning Configuration to the Active Configuration: in this case, clears
	any previously-defined zones.

A-ix

ATTO Technology Inc. Diamond Storage Array Installation and Operation Manual