Philips CDR 760 English Unfinalizing CD-RW discs, Start analogue recording, For CD-RW discs only

Page 17

RECORDING

Start analogue recording	Finalizing CD-R & CD-RW discs

1To start recording, press PLAY on the CD recorder and immediately start the source.

➜RECORD lights continuously. The track number and recording time used appear on the display.

•To record a 3-second silence at the beginning of a track, press PAUSE.

•To check the (remaining) recording time, press Display. (This can also be done during the recording.)

2To stop recording, press STOP on the CD recorder. ➜ RECORD will go out.

•To interrupt recording, press PAUSE.

➜ RECORD will start to flash. Resume at step 1.

After recording the display will show UPDATE for several seconds.

Note: With AUTO TRACK on, the recorder will stop automatically after 20 seconds silence. With AUTO TRACK off, the AUTO STOP mode is disabled.

Finalizing is a simple procedure that is necessary in order to play the discs on a regular (non-recording) CD player.

Note: Finalizing prevents any further recording on a CD-R. A finalized CD-RW must be unfinalized to allow further recording or erasure of tracks.

1Make sure the disc is absolutely free of scratches and dust particles.

2With the recorder stopped press FINALIZE and then within 3 seconds press RECORD.

DIG AUTO TRACK REPEAT 1 TOTAL REM

TRACK TIME CD SYNC

ALOG

RECORD

FINALIZE

PROG

ERASE

L

COPY

RECORDABLE

➜The approximate finalization time will appear in the display. RECORD & FINALIZE lights up.

The display counts down through the finalization. On completion, the total number of tracks and the total time recorded will appear on the display.

For CD-R CD RECORDABLE will change to CD on the display. For CD-RW no change will be seen on the display.

Finalizing will last at least 2 minutes.

Note: During finalization, the CD recorder will not accept operating commands.

English

Unfinalizing CD-RW discs

For CD-RW discs only.

If you want to make more recordings (or to erase tracks) on a finalized disc you must unfinalize it first. The Table of Contents (TOC) on the disc will be removed.

To unfinalize:

1 Press ERASE twice.

➜On the display, TOC and ERASE will flash.

DIG AUTO TRACK REPEAT 1 TOTAL REM			TRACK TIME CD SYNC
LOG				RECORD

				FINALIZE
PROG				ERASE
		L		COPY
	RECORDABLE	L		COPY

2Press RECORD within 3 seconds.

➜ TOC and ERASE light up continuously during erasure.

Note: This will take approximately 1 minute.

15

Image 17

Contents CDR 760 CD recorder Important Safety Instructions English Français Español ContentsEnspañol Français English Type General InformationSet complies with the FCC-Rules, Part 15 and with 21 CFR CD-R Player Limited WarrantyTechnical information English Table of contentsWelcome Accessories Discs for recording Maintenance EnglishDiscs for playback CD-Audio Recordable CD-R discsOperating buttons on the front Connections on the back Operating Buttons and ConnectionsDisplay messages DisplayDisplay explanation Connections general InstallationOptical output of a CD player Digital coaxial connectionsDigital optical connections Press ON/OFF to turn the CD recorder on Power supplySet-up recommendations Remote control commands Remote Control & Inserting DiscsInserting discs Display will indicate the type of disc you have insertedEnglish Remarks about recording RecordingDigital recording unsynchronized Digital unsynchronized Digital synchronized AnalogueStart digital recording Synchronized digital recording CD-SYNCPreparing for synchronized digital recording Start synchronized digital recordingStop the source Analogue recordingPreparing for analogue recording For CD-RW discs only English Unfinalizing CD-RW discsStart analogue recording Erasing CD-RW discs Erasing & PlayingPlaying a CD To erase the last trackSelecting a track or searching PlayingShuffle play Repeat CD, track or programDiagnostic program Fixing ProblemsTroubleshooting Table des matières GénéralitésBienvenue Caractéristiques techniquesDisques destinés à la lecture AccessoiresDisques destinés à l’enregistrement Entretien Français Français Commandes ET ConnexionsPhones . . . . . . . . . prise pour casque Connexion secteurDescription AfficheurGénéralités sur les connexions Utilisez le câble fourni avec l’appareil avec fiches noires Remettez le couvercle en place Conseils d’installationOuvrez le couvercle du compartiment des piles Mise en place des disques Français Commandes à distanceRecherche avant ChargementDIG Coaxial ou DIG Optical s’affiche EnregistrementDémarrage de l’enregistrement numérique Enregistrement numérique synchronisé CD-SYNCRecord clignote PréparationArrêtez la source Enregistrement analogiqueDémarrage de l’enregistrement analogique Finalisation disques CD-R et CD-RWAnnulation de la finalisation disques CD-RW Effacement des disques CD-RW Effacement ET LectureLecture d’un disque compact Pour effacer la dernière plageSélection d’une plage ou recherche Lecture en mode aléatoireLecture Prog clignote sur l’afficheur ProgrammationAppuyez sur Play pour démarrer la lecture du programme Effacement d’un programmeFrançais Dépannage EN CAS DE ProblemesProgramme de diagnostic Remarques Indice Información GeneralBienvenido Datos técnicosAccesorios Discos para grabación Mantenimiento EnspañolDiscos para reproducción Controles del panel frontal Conexiones del panel posterior Controles Y ConexionesMensajes de pantalla PantallaDescripción de la pantalla Conexiones generales InstalaciónDigital óptica de un reproductor de CD Conexiones digitales coaxialesConexiones digitales ópticas Pulse ON/OFF para encender el grabador de CD Recomendaciones de configuraciónAlimentación Órdenes del mando a distancia Mando a Distancia E Inserción DE DiscosInserción de discos ShuffleEl número de grabaciones del original es ilimitado GrabaciónComienzo de grabación digital Grabación digital sincronizada CD-SYNCPreparación para la grabación digital sincronizada Inicie la grabación digital sincronizadaPreparación para la grabación analógica Grabación analógicaEnspañol Rehabilitación de discos CD-RW Finalización de discos CD-R y CD-RWDetenga la fuente Inicie la grabación analógicaReproducción de un CD Borrado de discos CD-RWPara borrar la última pista Para borrar todo el discoSelección de una pista o búsqueda ReproducciónReproducción aleatoria Selección de una pista con el disco paradoBorrado de un programa Repetición de CD, pista o programa ProgramaciónPulse Play para dar comienzo a la reproducción del programa Programa de diagnóstico Detección DE ProblemasEnspañol Solución de problemas