Philips CDR 760 manual Display explanation, Display messages

DISPLAY

Display explanation

	1	2		3		4				5				6
	DIG		AUTO	TRACK		REPEAT 1		TOTAL	REM		TRACK		TIME	CD SYNC	7
	ANALOG													RECORD	8
17														FINALIZE
	PROG													ERASE	9
		RECORDABLE			L									COPY	10
					-50	-40	-30	-20	-10	-6	-3	0	OVER	PROHIBIT
	CD	REWRITABLE			R									PAUSE
	16 15		14	13				12						11

1	ANALOG	analogue input is selected
2	DIG	lights up when digital input is
		selected and flashes when digital
		input is incorrect.

3 AUTO TRACK . . . . . automatically increase track numbers

4 REPEAT (1) . . . . . . . repeat function activated during play

5Track number and time.

6 CD-SYNC . . . . . . . . synchronized recording is active.

7 RECORD . . . . . . . . . lights up during recording and flashes in record standby

8 FINALIZE . . . . . . . . lights up during finalizing and flashes in finalize standby

9 ERASE . . . . . . . . . . lights up during erase recording and flashes in erase standby

0COPY PROHIBIT . . Lights when trying to record digital protected audio

! PAUSE . . . . . . . . . . pause function is active

@Record/play level bar (analogue)

#RECORDABLE . . . . Unfinalized CD-R disc inserted

$ REWRITABLE	CD-RW disc inserted
% CD	CD inserted (a pre-recorded CD or
	finalized CD-R or CD-RW disc)
^	remote control active
& PROG	programmed play

Display messages

Messages as listed and explained here may appear on the display for your guidance.

READING	player is reading disc information
OPC	during OPC procedure
OPEN	during tray opening
CLOSE	during tray closing
NO DISC	no disc inserted or disc unreadable
UPDATE	updating disc contents
ERROR	write error during recording
RECOVER	during recovery procedure
WAIT	recording stop (4 seconds) in progress
SYNC	during synchronized recording standby
TRACK	during erase-track standby
DISC	during erase-disc standby
SERVICE	self-test failed
OPCFAIL	laser power calibration failed. Further
	recording not possible
FULL	program full
CD FULL	no more recording possible
EMPTY	no recordings on disc, finalizing not possible
NO AUDIO ....	(flashing) no audio disc loaded or failure to
	read data
FINAL	laser power calibration performed 96 times,
	finalize disc
COAXIAL	digital coaxial input selected
OPTICAL	digital optical input selected
SHUFFLE	during shuffle
RC-DISC	recovered disc. Finalizing not possible
TOC	flashes during unfinalize disc standby, lights
	during unfinalize disc
INPUT	during input selection (CD-SYNC)
ANALOG	analogue input selected

English

7