Network Technologies CS-16/8 operation manual Administrator Controls, Login as the administrator

Page 17

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

3.1 Administrator Controls

3.1.1 Login as the administrator

1.The TERMINAL must first be configured (and is typically delivered preconfigured) as described on page 8 under "Getting Started”.

2.Press [ Enter ] on the keyboard, wait three (3) seconds, and the port will open to the "Accessible host list" for "User01", logged in at "Port00".

3.Press [ Esc] to logout, and [Y] to confirm. A message will be displayed "Disconnecting user now"

4. Press [Spacebar] or [ Enter]. A prompt requesting a Username will appear.

5.Enter [root] (all lowercase letters) and press [ Enter]. A prompt for a password will appear.

6.Enter [nti] (all lowercase letters) and press [ Enter]. The “Administrator main menu” will appear for user ROOT on port 1.

Note: This will only enter the administrator mode if the administrator password has not yet been changed from "nti".

FYI: If SERIMUX is not at initial power-ON, omit steps 2 and 3 above to login.

Figure 8- Administrator main menu

FYI: The Administrator main menu will also appear if a user with administrative privileges presses [4] from the User main menu.

From the Administrator main menu, the following options are possible:

Function	Description	Keystroke
Port List	Display the port list	[1]
Port settings	View or modify any port settings	[2]
Port disconnect	Disconnect any port and logout the user logged in or connected to the port	[3] + [port #]
Port Connect	Connect to any port .	[4] + [port #]
User list	Display the user list	[5]
User settings	View or modify user settings	[6]
User disconnect/logout	Disconnect and logout any user connected to a port	[7]
Advanced settings	View or modify advanced administrative settings (pg 17)	[8]
Return to user menu	Leave the administrative menu and return to the User main menu (only	[9]
	listed when a user with administrative rights is logged in)
Logout	Logout from SERIMUX	[0]

12

Image 17

Contents SERIMUX-TERM-CS-16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Introduction FeaturesTerminal Converter Multiple RS-232 EmulationsConsole Switch DB25M-RJ45F-C DB9F-RJ45F MaterialsFront and Rear Views of SERIMUX-TERM-CS-16 Features and Functions#10-32x3/4 Rack Screws supplied Cage Nuts Supplied InstallationRack Mounting Instructions IEC Power Connector Connect Devices, Hosts, and PowerPowercord RJ45 Male ConnectorConnect the Serimux and Terminal to a Network Power Up The SERIMUX-TERM-CS-16Connect the Monitor and Keyboard MonitorGetting Started Setup The TerminalF2- Genrl Setup Menu Saving and Exiting SetupF4- Comm Setup Menu Connect to the SerimuxStartup- Accessible host list Default keypad PIN number is Using the Serimux Console SwitchTerminal Control Serial ControlLogin as the administrator Administrator ControlsPort list displays the status of all ports Port ListPort settings menu Port SettingsSetting Description Value Data bit Port serial settingsStop Bit ParityInter-character delay Flow control CommandXon or Xoff Characters DTR line behaviorCopy Port Serial Settings Modem settingsDisplay serial settings for different port number Function KeystrokeClear Port data buffer Display modem settings for different port numberPort data buffer User List User ListUser settings menu User SettingsOption Description Port accessCopy User Settings Change administrator password Advanced SettingsSetting Description Value Local KeyPad PIN Defines the PIN number for LocalLoad new firmware Save current firmware FirmwareFunction Description Serimux is waiting to save its firmware User Controls User Accessible host list screenUser main menu User main menuPort List screen Limited user accessible Port listTerse mode commands ¾ Connect to port User Terse mode¾ Accessible host list ¾ Port info¾ User Logout System Reset button¾ Verbose mode Firmware upload window Firmware UpgradeLast confirmation before firmware update Keypad Control Login the administratorFunctions of the Keypad Action from Keypad Reaction of SerimuxLogin user to a port Login a user to the administrator main menuAction from Keypad Disconnect and logout a userConnect 2 host ports To detach a modem Reset Serimux Console Switch to default settingsDisconnect 2 ports How To Setup The Terminal Using the TerminalChanging The Terminal Operating Parameters F1- Disp Setup MenuF2- Genrl Setup Menu Printer F3- Keybd Setup MenuF4- Comm Setup Menu F7- FKeys SET-UP Definition Setup Menu F5- Misc Setup MenuF6-Tabs SET-UP Menu Printer RCV ON/OFFF8- Ansbk SET-UP Menu F9- Lan Setup MenuF10- Colr1 Set-up Menu Programmable KeysF11- Colr2 Set-up Menu Color Association = OFF/ON Color Setup MenuAttribute = Bold/Blink OptionPalette Display Attribute Foreground Color Background Color Color PalettesColor Palettes Contd Command Enhanced PC Local Keyboard CommandsCommands Supported in Ascii Personalities Terminal Command GuideSame WyseSelect bell volume Native Mode WyseStop parity word Key/fkey DELKey/fkey Sequence Sequence DEL Sequence DELESC . cursor1 Message CRAttr ESC a mf attrFcolor Bcolor mapCcc C ColLine col Sending data Editing ContdClearing Data Character Sets Print FunctionsSet Pp bb...bbVariable Values for Commands Variable Values for Commands Contd Line/Column LengthDefinition Max Maximum SpeedFunction Key Bell VolumePalette Color Pallette Parity BitsSupported VT100,VT220 and Console Ansi Commands Ansi Command Guide1 VT100, VT220 and Console Ansi Command Guide Character Set Selection Supported VT100, VT220 and Console Ansi Commands, ContdESC Ps final Label assignedFinal character Supported VT100, VT220 and Console Ansi Commands ContdValues for Ps above Character AttributeEditing Functions Values for Psn in table onShifted function key See tables below an on next page for values Kc/hc ST StringClear Key Lock Unshifted function key Redefine keys with stringKey Value Values of Fn for Numeric Keypad keysTerminal Resets More Terminal Control CommandsAuxiliary Keypad Modes Transmission/Printer ControlCommand VT52 2 VT52 Command GuideSee table below for values of Ps Keyboard LanguageBasic Setup Using Printer Server via Ethernet ConnectionSetup for LPD Tftp Printing Setup for TftpLPD printing Hardware Information Hardware Specifications TerminalHardware Specifications Serimux CPU-to-RACKMUX Ethernet Crossover Cable Pin assignment at Wire Color Standard End Crossed EndSerial Port Cabling Serial Port PinoutsCable Adapters RJ45 SignalDB25F SUB-D Female connector Terminal Connector Pin Assignments3 4 Mating face of an RJ45 FemaleDescription Acceptable Value Default Value Appendix a Serimux Port CharacteristicsAppendix B Serimux User and Administrator Characteristics AdministratorIndex Warranty Information