Network Technologies CS-16/8 operation manual Disconnect and logout a user, Connect 2 host ports

Page 40

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

Login user to a port and connect the user port to a host port

Action (from Keypad)

1.Press USER

2.Enter the user number

3.Press PORT

4.Enter the user port number

5.Press PORT again

6.Enter the host port number

7.Press ENTER

Reaction of SERIMUX

-The LED “User” will illuminate.

-The port 0 LED will be illuminated, the other port LEDs will be OFF.

-The corresponding port LED will illuminate

-The LED "Port" will illuminate

-The corresponding port LED will illuminate. The other port LEDs will be OFF.

-The LED "Port" will illuminate

-The corresponding port LED will illuminate. The other port LEDs will be OFF.

-The User main menu will be displayed on the terminal application on the user port: (see Figure 22 on page 27 )

-If command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate together. They will turn OFF after 30 seconds or when any other key is pressed.

The user will be connected if:

–the specified user is enabled, and is not logged in;

–the specified ports are accessible to the user;

–the user port is not otherwise already connected and the port type is “User”.

–the host port is not otherwise already connected and the port type is “Host”.

Disconnect and logout a user

Action (from Keypad)

Reaction of SERIMUX

1.

Press DISCON

- The LED “Discon” will illuminate.

2.

Press USER

- The LED “User” will illuminate.

3.

Enter the user number

-

The corresponding port LED will illuminate, the other port LEDs will be OFF

4.

Press ENTER

-

The LEDs “Port", “Admin”, "User", and "Discon" will illuminate briefly.

Connect 2 host ports

Action (from Keypad)

1.Press PORT

2.Enter the first port number

3.Press PORT again

4.Enter the second port number (to connect the first port number to)

5.Press ENTER

Reaction of SERIMUX

-The LED “Port” will illuminate.

-The port 0 LED will be illuminated. The other port LEDs will be OFF.

-The corresponding port LED will illuminate, the other port LEDs will be OFF

-The LED “Port” will illuminate. The port 0 LED will be illuminated, the other port LEDs will be OFF.

-The corresponding port LED will illuminate. The other port LEDs will be OFF.

-If command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate together. They will turn OFF after 30 seconds or when any other key is pressed.

The two host ports will be connected if:

–the ports are not connected

–the ports type is “Host”.

35

Page 39 Page 41
Image 40
Page 39 Page 41
Contents SERIMUX-TERM-CS-16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Features IntroductionTerminal Converter Multiple RS-232 EmulationsConsole Switch Materials DB25M-RJ45F-C DB9F-RJ45FFeatures and Functions Front and Rear Views of SERIMUX-TERM-CS-16Rack Mounting Instructions Installation#10-32x3/4 Rack Screws supplied Cage Nuts Supplied Connect Devices, Hosts, and Power IEC Power ConnectorPowercord RJ45 Male ConnectorPower Up The SERIMUX-TERM-CS-16 Connect the Serimux and Terminal to a NetworkConnect the Monitor and Keyboard MonitorSetup The Terminal Getting StartedSaving and Exiting Setup F2- Genrl Setup MenuF4- Comm Setup Menu Connect to the SerimuxStartup- Accessible host list Using the Serimux Console Switch Default keypad PIN number isTerminal Control Serial ControlAdministrator Controls Login as the administratorPort List Port list displays the status of all portsPort Settings Port settings menuSetting Description Value Port serial settings Data bitStop Bit ParityFlow control Command Inter-character delayXon or Xoff Characters DTR line behaviorModem settings Copy Port Serial SettingsDisplay serial settings for different port number Function KeystrokePort data buffer Display modem settings for different port numberClear Port data buffer User List User ListUser Settings User settings menuCopy User Settings Port accessOption Description Advanced Settings Change administrator passwordSetting Description Value Local KeyPad PIN Defines the PIN number for LocalFunction Description FirmwareLoad new firmware Save current firmware Serimux is waiting to save its firmware User Accessible host list screen User ControlsUser main menu User main menuLimited user accessible Port list Port List screenUser Terse mode Terse mode commands ¾ Connect to port¾ Accessible host list ¾ Port info¾ Verbose mode System Reset button¾ User Logout Firmware Upgrade Firmware upload windowLast confirmation before firmware update Login the administrator Keypad ControlFunctions of the Keypad Action from Keypad Reaction of SerimuxLogin a user to the administrator main menu Login user to a portConnect 2 host ports Disconnect and logout a userAction from Keypad Disconnect 2 ports Reset Serimux Console Switch to default settingsTo detach a modem Using the Terminal How To Setup The TerminalF2- Genrl Setup Menu F1- Disp Setup MenuChanging The Terminal Operating Parameters F4- Comm Setup Menu F3- Keybd Setup MenuPrinter F5- Misc Setup Menu F7- FKeys SET-UP Definition Setup MenuF6-Tabs SET-UP Menu Printer RCV ON/OFFF9- Lan Setup Menu F8- Ansbk SET-UP MenuF10- Colr1 Set-up Menu Programmable KeysColor Association = OFF/ON Color Setup Menu F11- Colr2 Set-up MenuAttribute = Bold/Blink OptionColor Palettes Palette Display Attribute Foreground Color Background ColorColor Palettes Contd Local Keyboard Commands Command Enhanced PCTerminal Command Guide Commands Supported in Ascii PersonalitiesSame WyseNative Mode Wyse Select bell volumeStop parity word Key/fkey DELSequence DEL Key/fkey Sequence Sequence DELESC . cursor1 Message CRESC a mf attr AttrFcolor Bcolor mapLine col ColCcc C Clearing Data Editing ContdSending data Print Functions Character SetsSet Pp bb...bbVariable Values for Commands Variable Values for Commands Contd Length Line/ColumnDefinition Max Maximum SpeedBell Volume Function KeyPalette Color Pallette Parity Bits1 VT100, VT220 and Console Ansi Command Guide Ansi Command GuideSupported VT100,VT220 and Console Ansi Commands Supported VT100, VT220 and Console Ansi Commands, Contd Character Set SelectionESC Ps final Label assignedSupported VT100, VT220 and Console Ansi Commands Contd Final characterValues for Ps above Character AttributeValues for Psn in table on Editing FunctionsClear Key Lock See tables below an on next page for values Kc/hc ST StringShifted function key Redefine keys with string Unshifted function keyKey Value Values of Fn for Numeric Keypad keysMore Terminal Control Commands Terminal ResetsAuxiliary Keypad Modes Transmission/Printer Control2 VT52 Command Guide Command VT52See table below for values of Ps Keyboard LanguageUsing Printer Server via Ethernet Connection Basic SetupSetup for LPD LPD printing Setup for TftpTftp Printing Hardware Specifications Serimux Hardware Specifications TerminalHardware Information Pin assignment at Wire Color Standard End Crossed End CPU-to-RACKMUX Ethernet Crossover CableSerial Port Cabling Serial Port PinoutsRJ45 Signal Cable AdaptersDB25F Terminal Connector Pin Assignments SUB-D Female connector3 4 Mating face of an RJ45 FemaleAppendix a Serimux Port Characteristics Description Acceptable Value Default ValueAppendix B Serimux User and Administrator Characteristics AdministratorWarranty Information Index
Top Page Image Contents