Network Technologies CS-16/8 Hardware Information, Hardware Specifications Terminal

Page 73

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

5. HARDWARE INFORMATION

Introduction

This chapter provides information on hardware specifications, pinouts for the Ethernet cable, pinouts for port connectors, and pinouts for the cable adapters.

5.1 Hardware Specifications: TERMINAL

Physical

Size (In.) WxDxH

Weight

Temperature

Humidity

Power Supply

Power Consumption

Cables Included

Terminal Emulation

Emulations

Character matrix

Screen size

Page length

Cursor

Modes

Color modes

Communication Ports Network port

Local printer ports

Serial baud rates

Data format

Serial handshake

Communications options

19x18.4x1.75 23.3 lbs.

0°~38°C operating, -30°~60°C storage 17% to 96% non condensing

Auto -ranging 90-262 VAC, 47-63Hz 60W (max), <25W (standby) Powercord (IEC320)

VT52, VT100, VT220, Console ANSI, PC TERM, TVI910+/925, WY-50+, WY-60, WY-100, WY- 120, WY-325, PCG Alpha

7x12 dot matrix in 10x16 cell with 3 dot descenders 80x25

1, 2, or 4 screens (multiple screen page length reduces maximum number of possible telnet sessions)

Blink or steady, block or underline

Full duplex, half duplex, block mode, half block mode 16 foreground and 16 background colors

One RJ45 10Base-T Ethernet port

One DB25F Parallel and one DB9M RS232 port 50 to 115,200 bps

7 or 8 data bits with or without parity, 1 or 2 stop bits XON/XOFF, XPC, and hardware DTR

Single RS232 server connection, or up to 16 Ethernet telnet sessions to predefined IP addresses. Both serial and Ethernet connections can not be used concurrently.

5.2 Hardware Specifications: SERIMUX

	Attribute			Value

	Operating temperature			40°F to 120°F (5°C to 50°C)
	Storage temperature			-20°F to 140°F (-29°C to 60°C)
	Humidity			10% to 90% non-condensing
	Power supply External			100 - 240VAC, 50/60 Hz, 1.0A (max)
	Power consumption			DC input: 0.8A/5VDC, 4.5 W (typical), 8W (max)
	Operating system			Linux Hard Hat embedded
	SDRAM			64 megabytes
	Flash memory			8 megabytes

68

Image 73

Contents SERIMUX-TERM-CS-16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Introduction FeaturesTerminal Converter Multiple RS-232 EmulationsConsole Switch DB25M-RJ45F-C DB9F-RJ45F MaterialsFront and Rear Views of SERIMUX-TERM-CS-16 Features and FunctionsRack Mounting Instructions Installation#10-32x3/4 Rack Screws supplied Cage Nuts Supplied IEC Power Connector Connect Devices, Hosts, and PowerPowercord RJ45 Male ConnectorConnect the Serimux and Terminal to a Network Power Up The SERIMUX-TERM-CS-16Connect the Monitor and Keyboard MonitorGetting Started Setup The TerminalF2- Genrl Setup Menu Saving and Exiting SetupF4- Comm Setup Menu Connect to the SerimuxStartup- Accessible host list Default keypad PIN number is Using the Serimux Console SwitchTerminal Control Serial ControlLogin as the administrator Administrator ControlsPort list displays the status of all ports Port ListPort settings menu Port SettingsSetting Description Value Data bit Port serial settingsStop Bit ParityInter-character delay Flow control CommandXon or Xoff Characters DTR line behaviorCopy Port Serial Settings Modem settingsDisplay serial settings for different port number Function KeystrokePort data buffer Display modem settings for different port numberClear Port data buffer User List User ListUser settings menu User SettingsCopy User Settings Port accessOption Description Change administrator password Advanced SettingsSetting Description Value Local KeyPad PIN Defines the PIN number for LocalFunction Description FirmwareLoad new firmware Save current firmware Serimux is waiting to save its firmware User Controls User Accessible host list screenUser main menu User main menuPort List screen Limited user accessible Port listTerse mode commands ¾ Connect to port User Terse mode¾ Accessible host list ¾ Port info¾ Verbose mode System Reset button¾ User Logout Firmware upload window Firmware UpgradeLast confirmation before firmware update Keypad Control Login the administratorFunctions of the Keypad Action from Keypad Reaction of SerimuxLogin user to a port Login a user to the administrator main menuConnect 2 host ports Disconnect and logout a userAction from Keypad Disconnect 2 ports Reset Serimux Console Switch to default settingsTo detach a modem How To Setup The Terminal Using the TerminalF2- Genrl Setup Menu F1- Disp Setup MenuChanging The Terminal Operating Parameters F4- Comm Setup Menu F3- Keybd Setup MenuPrinter F7- FKeys SET-UP Definition Setup Menu F5- Misc Setup MenuF6-Tabs SET-UP Menu Printer RCV ON/OFFF8- Ansbk SET-UP Menu F9- Lan Setup MenuF10- Colr1 Set-up Menu Programmable KeysF11- Colr2 Set-up Menu Color Association = OFF/ON Color Setup MenuAttribute = Bold/Blink OptionPalette Display Attribute Foreground Color Background Color Color PalettesColor Palettes Contd Command Enhanced PC Local Keyboard CommandsCommands Supported in Ascii Personalities Terminal Command GuideSame WyseSelect bell volume Native Mode WyseStop parity word Key/fkey DELKey/fkey Sequence Sequence DEL Sequence DELESC . cursor1 Message CRAttr ESC a mf attrFcolor Bcolor mapLine col ColCcc C Clearing Data Editing ContdSending data Character Sets Print FunctionsSet Pp bb...bbVariable Values for Commands Variable Values for Commands Contd Line/Column LengthDefinition Max Maximum SpeedFunction Key Bell VolumePalette Color Pallette Parity Bits1 VT100, VT220 and Console Ansi Command Guide Ansi Command GuideSupported VT100,VT220 and Console Ansi Commands Character Set Selection Supported VT100, VT220 and Console Ansi Commands, ContdESC Ps final Label assignedFinal character Supported VT100, VT220 and Console Ansi Commands ContdValues for Ps above Character AttributeEditing Functions Values for Psn in table onClear Key Lock See tables below an on next page for values Kc/hc ST StringShifted function key Unshifted function key Redefine keys with stringKey Value Values of Fn for Numeric Keypad keysTerminal Resets More Terminal Control CommandsAuxiliary Keypad Modes Transmission/Printer ControlCommand VT52 2 VT52 Command GuideSee table below for values of Ps Keyboard LanguageBasic Setup Using Printer Server via Ethernet ConnectionSetup for LPD LPD printing Setup for TftpTftp Printing Hardware Specifications Serimux Hardware Specifications TerminalHardware Information CPU-to-RACKMUX Ethernet Crossover Cable Pin assignment at Wire Color Standard End Crossed EndSerial Port Cabling Serial Port PinoutsCable Adapters RJ45 SignalDB25F SUB-D Female connector Terminal Connector Pin Assignments3 4 Mating face of an RJ45 FemaleDescription Acceptable Value Default Value Appendix a Serimux Port CharacteristicsAppendix B Serimux User and Administrator Characteristics AdministratorIndex Warranty Information