Network Technologies CS-16/8 Features and Functions, Front and Rear Views of SERIMUX-TERM-CS-16

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

Front and Rear Views of SERIMUX-TERM-CS-16

	NTI		SERIMUX R
Network T echnologies		Inc
			PWR	17	18	19	20	21	22	23	24	25	26	27	28	29	30	31	32	Port
																					Discon			6	7	8	9	0
																						ESC	PORT						DISCON
			0	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	Admin	User	ADMIN	USER	1	2	3	4	5	ENTER

1					2						3
				9		10				11
	R NETWORK		MONITOR		SERIAL	PRINTER		PARALLEL
	NTI1275 Danner Dr	TECHNOLOGIES
		INCORPORATED
		Tel:330-562-7070
	Aurora, OH 44202	Fax:330-562-1999
	www.networktechinc.com								9	8	7
		16	15	14	13	12	11	10

				4
12			13	14
	TERMINAL-	RESET
	10 BASE T
	5	4	3	2	1	KEYBOARD
6

5	6	8
		7

FEATURES AND FUNCTIONS

1.Power LED- indicates operation status

Green=Power-On, Video Input Signal OK

Red = Suspend / Stand-by, or no Video Input Signal

2.Port LEDs- LEDs will illuminate to indicate active administrator port and data traffic; also used to indicate port or user number when entering commands from the keypad.

3.Command LEDs- LEDs will illuminate to indicate functions being performed

4.Keypad- for manual control of switch functions

5.Power- IEC Power Socket- for connection of AC power cord

6.Switch- for powering the SERIMUX On/Off

7.RJ45 Connectors- for attaching CAT5 cables from serial devices

8.Keyboard- for connecting the user keyboard

9.Monitor- for connecting the user monitor

10.Serial -Male DB9 connector- for attaching a local printer serially

11.Parallel- Female DB25 connector- for attaching local printer with parallel printer cable

12.Terminal-10/100 Base T-RJ45 Connector for 10/100 Mbps communications- for TERMINAL connection to Ethernet

13.System Reset- button to cycle power to the SERIMUX and TERIMINAL without powering down the SERIMUX

14.ISP Button- For use when restoring the firmware in the SERIMUX (factory use only)

4