Network Technologies CS-16/8 Login a user to the administrator main menu, Login user to a port

Page 39

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

Disconnect the administrator or a user with administrative privileges

Action (from Keypad)

Reaction of SERIMUX

1.

Press DISCON

- The LED “Discon” will illuminate.

 

 

- The port 0 LED will be illuminated, the other port LEDs will be OFF.

2.

Press ADMIN

- The LED "Admin" will illuminate.

3.

Press ENTER

- If command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate

 

 

together. They will turn OFF after 30 seconds or when any other key is pressed.

- The message: “Disconnecting administrator now” will be displayed by the terminal application running on the former administrator port.

Login a user to the administrator main menu

Action (from Keypad)

Reaction of SERIMUX

1.

Press ADMIN

- The LED “Admin” will illuminate. The port 0 LED will be illuminated, the other port LEDs will

 

 

be OFF.

2.

Press PORT

- The LED “Port” will illuminate.

3.

Enter port number (00 by

- The corresponding port LED will illuminate, the other port LEDs will be OFF.

 

default)

- The LED “User” will illuminate.

4.

Press USER

5.

Enter user number

- The corresponding port LED will illuminate

6.

Press ENTER

- If the command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate

 

 

together. They will turn OFF after 30 seconds or when any other key is pressed.

 

 

- The administrator main menu (Figure 8, page 12) will be displayed on the terminal

 

 

application running on the administrator port.

The “Administrator main menu” will be displayed on the serial device connected to the specified port if:

–the administrator is not logged in;

–the specified user has administrative privileges, is enabled, and is not logged in;

–the specified port is accessible to the user;

–the specified port is not otherwise already connected and the port type is “User”.

Login user to a port

Action (from Keypad)

Reaction of SERIMUX

1.

Press USER

- The LED “User” will illuminate.

 

 

-

The port 0 LED will be illuminated, the other port LEDs will be OFF.

2.

Enter the user number

- The corresponding port LED will illuminate

3.

Press PORT

- The LED "Port" will illuminate

4.

Enter the port number

- The corresponding port LED will illuminate, the other port LEDs will be OFF.

5.

Press ENTER

- The User main menu will be displayed on the terminal application on the user port: (see

 

 

 

Figure 22 on page 27 )

 

 

- If the command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate

 

 

 

together. They will turn OFF after 30 seconds or when any other key is pressed.

The initial user screen will be displayed on the serial device connected to the specified port if:

–the specified user is enabled, and is not logged in at another port;

–the specified port is accessible to the user;

–the port is not otherwise already connected and the port type is “User”.

34

Page 38 Page 40
Image 39
Page 38 Page 40
Contents SERIMUX-TERM-CS-16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Multiple RS-232 Emulations FeaturesIntroduction Terminal ConverterConsole Switch DB25M-RJ45F-C DB9F-RJ45F MaterialsFront and Rear Views of SERIMUX-TERM-CS-16 Features and FunctionsInstallation Rack Mounting Instructions#10-32x3/4 Rack Screws supplied Cage Nuts Supplied RJ45 Male Connector Connect Devices, Hosts, and PowerIEC Power Connector PowercordMonitor Power Up The SERIMUX-TERM-CS-16Connect the Serimux and Terminal to a Network Connect the Monitor and KeyboardGetting Started Setup The TerminalConnect to the Serimux Saving and Exiting SetupF2- Genrl Setup Menu F4- Comm Setup MenuStartup- Accessible host list Serial Control Using the Serimux Console SwitchDefault keypad PIN number is Terminal ControlLogin as the administrator Administrator ControlsPort list displays the status of all ports Port ListPort settings menu Port SettingsSetting Description Value Parity Port serial settingsData bit Stop BitDTR line behavior Flow control CommandInter-character delay Xon or Xoff CharactersFunction Keystroke Modem settingsCopy Port Serial Settings Display serial settings for different port numberDisplay modem settings for different port number Port data bufferClear Port data buffer User List User ListUser settings menu User SettingsPort access Copy User SettingsOption Description Local KeyPad PIN Defines the PIN number for Local Advanced SettingsChange administrator password Setting Description ValueFirmware Function DescriptionLoad new firmware Save current firmware Serimux is waiting to save its firmware User Controls User Accessible host list screenUser main menu User main menuPort List screen Limited user accessible Port list¾ Port info User Terse modeTerse mode commands ¾ Connect to port ¾ Accessible host listSystem Reset button ¾ Verbose mode¾ User Logout Firmware upload window Firmware UpgradeLast confirmation before firmware update Action from Keypad Reaction of Serimux Login the administratorKeypad Control Functions of the KeypadLogin user to a port Login a user to the administrator main menuDisconnect and logout a user Connect 2 host portsAction from Keypad Reset Serimux Console Switch to default settings Disconnect 2 portsTo detach a modem How To Setup The Terminal Using the TerminalF1- Disp Setup Menu F2- Genrl Setup MenuChanging The Terminal Operating Parameters F3- Keybd Setup Menu F4- Comm Setup MenuPrinter Printer RCV ON/OFF F5- Misc Setup MenuF7- FKeys SET-UP Definition Setup Menu F6-Tabs SET-UP MenuProgrammable Keys F9- Lan Setup MenuF8- Ansbk SET-UP Menu F10- Colr1 Set-up MenuOption Color Association = OFF/ON Color Setup MenuF11- Colr2 Set-up Menu Attribute = Bold/BlinkPalette Display Attribute Foreground Color Background Color Color PalettesColor Palettes Contd Command Enhanced PC Local Keyboard CommandsWyse Terminal Command GuideCommands Supported in Ascii Personalities SameKey/fkey DEL Native Mode WyseSelect bell volume Stop parity wordMessage CR Sequence DELKey/fkey Sequence Sequence DEL ESC . cursor1Bcolor map ESC a mf attrAttr FcolorCol Line colCcc C Editing Contd Clearing DataSending data Pp bb...bb Print FunctionsCharacter Sets SetVariable Values for Commands Variable Values for Commands Contd Max Maximum Speed LengthLine/Column DefinitionParity Bits Bell VolumeFunction Key Palette Color PalletteAnsi Command Guide 1 VT100, VT220 and Console Ansi Command GuideSupported VT100,VT220 and Console Ansi Commands Label assigned Supported VT100, VT220 and Console Ansi Commands, ContdCharacter Set Selection ESC Ps finalCharacter Attribute Supported VT100, VT220 and Console Ansi Commands ContdFinal character Values for Ps aboveEditing Functions Values for Psn in table onSee tables below an on next page for values Kc/hc ST String Clear Key LockShifted function key Values of Fn for Numeric Keypad keys Redefine keys with stringUnshifted function key Key ValueTransmission/Printer Control More Terminal Control CommandsTerminal Resets Auxiliary Keypad ModesKeyboard Language 2 VT52 Command GuideCommand VT52 See table below for values of PsBasic Setup Using Printer Server via Ethernet ConnectionSetup for LPD Setup for Tftp LPD printingTftp Printing Hardware Specifications Terminal Hardware Specifications SerimuxHardware Information Serial Port Pinouts Pin assignment at Wire Color Standard End Crossed EndCPU-to-RACKMUX Ethernet Crossover Cable Serial Port CablingCable Adapters RJ45 SignalDB25F Mating face of an RJ45 Female Terminal Connector Pin AssignmentsSUB-D Female connector 3 4Administrator Appendix a Serimux Port CharacteristicsDescription Acceptable Value Default Value Appendix B Serimux User and Administrator CharacteristicsIndex Warranty Information
Top Page Image Contents