Network Technologies CS-16/8 Reset Serimux Console Switch to default settings, Disconnect 2 ports

Page 41
The administrator can view any changes in port connections made from the keypad by opening the terminal program on any terminal connected to a user port and view the “Port list” (see page 13).
Attach or detach a modem
To attach a modem Action (from Keypad)
1. Press DISCON
2. Press DISCON again
3. Press 1
4. Press PORT
5. Enter the port number
6. Press ENTER

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

Disconnect 2 ports

Action (from Keypad)

Reaction of SERIMUX

1.

Press DISCON

- The LED “Discon” will illuminate.

 

 

- The port 0 LED will be illuminated, the other port LEDs will be OFF.

2.

Press PORT

-

3.

Enter the port number

- The corresponding port LED will illuminate, the other port LEDs will be OFF.

4.

Press ENTER

- If command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate

 

 

together. They will turn OFF after 30 seconds or when any other key is pressed.

Reaction of SERIMUX

- The LED “Discon” will illuminate.

-The port 0 LED will be illuminated, the other port LEDs will be OFF.

- The LED “Discon” will illuminate.

-The port 0 LED will be illuminated, the other port LEDs will be OFF.

-

-

- The corresponding port LED will illuminate. The other port LEDs will be OFF.

- If command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate together. They will turn OFF after 30 seconds or when any other key is pressed.

The modem will be initialized and connected if a modem is connected to the specified port and powered ON. The administrator can verify this by viewing the Port list (see page 13).

To detach a modem

Action (from Keypad)

Reaction of SERIMUX

1.

Press DISCON

- The LED “Discon” will illuminate.

 

 

- The port 0 LED will be illuminated, the other port LEDs will be OFF.

2.

Press DISCON again

- The LED “Discon” will illuminate.

 

 

- The port 0 LED will be illuminated, the other port LEDs will be OFF.

3.

Press 0

-

4.

Press PORT

-

5.

Enter the port number

- The corresponding port LED will illuminate. The other port LEDs will be OFF.

6.

Press ENTER

- If command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate

 

 

together. They will turn OFF after 30 seconds or when any other key is pressed.

Reset SERIMUX Console Switch to default settings

SERIMUX can be reset to default settings using the Keypad. This procedure is only necessary if the administrator is unable to access the administrator main menu. This should only occur if an administrator password has been set and the password is not known.

The SERIMUX-TERM-CS-16 should be OFF before beginning this procedure.

1.Press and hold both local keypad “ADMIN” and “ESC” buttons.

2.Turn ON the SERIMUX-TERM-CS-16.

3.Wait 3 seconds.

4.Release the buttons.

Caution: During the reset, the customer modified parameter values will be replaced with the factory default values (for default values, see page 73, Appendix A); user names and passwords will return to default values (page 11).

36

Page 40 Page 42
Image 41
Page 40 Page 42
Contents SERIMUX-TERM-CS-16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Introduction FeaturesTerminal Converter Multiple RS-232 EmulationsConsole Switch DB25M-RJ45F-C DB9F-RJ45F MaterialsFront and Rear Views of SERIMUX-TERM-CS-16 Features and Functions#10-32x3/4 Rack Screws supplied Cage Nuts Supplied InstallationRack Mounting Instructions IEC Power Connector Connect Devices, Hosts, and PowerPowercord RJ45 Male ConnectorConnect the Serimux and Terminal to a Network Power Up The SERIMUX-TERM-CS-16Connect the Monitor and Keyboard MonitorGetting Started Setup The TerminalF2- Genrl Setup Menu Saving and Exiting SetupF4- Comm Setup Menu Connect to the SerimuxStartup- Accessible host list Default keypad PIN number is Using the Serimux Console SwitchTerminal Control Serial ControlLogin as the administrator Administrator ControlsPort list displays the status of all ports Port ListPort settings menu Port SettingsSetting Description Value Data bit Port serial settingsStop Bit ParityInter-character delay Flow control CommandXon or Xoff Characters DTR line behaviorCopy Port Serial Settings Modem settingsDisplay serial settings for different port number Function KeystrokeClear Port data buffer Display modem settings for different port numberPort data buffer User List User ListUser settings menu User SettingsOption Description Port accessCopy User Settings Change administrator password Advanced SettingsSetting Description Value Local KeyPad PIN Defines the PIN number for LocalLoad new firmware Save current firmware FirmwareFunction Description Serimux is waiting to save its firmware User Controls User Accessible host list screenUser main menu User main menuPort List screen Limited user accessible Port listTerse mode commands ¾ Connect to port User Terse mode¾ Accessible host list ¾ Port info¾ User Logout System Reset button¾ Verbose mode Firmware upload window Firmware UpgradeLast confirmation before firmware update Keypad Control Login the administratorFunctions of the Keypad Action from Keypad Reaction of SerimuxLogin user to a port Login a user to the administrator main menuAction from Keypad Disconnect and logout a userConnect 2 host ports To detach a modem Reset Serimux Console Switch to default settingsDisconnect 2 ports How To Setup The Terminal Using the TerminalChanging The Terminal Operating Parameters F1- Disp Setup MenuF2- Genrl Setup Menu Printer F3- Keybd Setup MenuF4- Comm Setup Menu F7- FKeys SET-UP Definition Setup Menu F5- Misc Setup MenuF6-Tabs SET-UP Menu Printer RCV ON/OFFF8- Ansbk SET-UP Menu F9- Lan Setup MenuF10- Colr1 Set-up Menu Programmable KeysF11- Colr2 Set-up Menu Color Association = OFF/ON Color Setup MenuAttribute = Bold/Blink OptionPalette Display Attribute Foreground Color Background Color Color PalettesColor Palettes Contd Command Enhanced PC Local Keyboard CommandsCommands Supported in Ascii Personalities Terminal Command GuideSame WyseSelect bell volume Native Mode WyseStop parity word Key/fkey DELKey/fkey Sequence Sequence DEL Sequence DELESC . cursor1 Message CRAttr ESC a mf attrFcolor Bcolor mapCcc C ColLine col Sending data Editing ContdClearing Data Character Sets Print FunctionsSet Pp bb...bbVariable Values for Commands Variable Values for Commands Contd Line/Column LengthDefinition Max Maximum SpeedFunction Key Bell VolumePalette Color Pallette Parity BitsSupported VT100,VT220 and Console Ansi Commands Ansi Command Guide1 VT100, VT220 and Console Ansi Command Guide Character Set Selection Supported VT100, VT220 and Console Ansi Commands, ContdESC Ps final Label assignedFinal character Supported VT100, VT220 and Console Ansi Commands ContdValues for Ps above Character AttributeEditing Functions Values for Psn in table onShifted function key See tables below an on next page for values Kc/hc ST StringClear Key Lock Unshifted function key Redefine keys with stringKey Value Values of Fn for Numeric Keypad keysTerminal Resets More Terminal Control CommandsAuxiliary Keypad Modes Transmission/Printer ControlCommand VT52 2 VT52 Command GuideSee table below for values of Ps Keyboard LanguageBasic Setup Using Printer Server via Ethernet ConnectionSetup for LPD Tftp Printing Setup for TftpLPD printing Hardware Information Hardware Specifications TerminalHardware Specifications Serimux CPU-to-RACKMUX Ethernet Crossover Cable Pin assignment at Wire Color Standard End Crossed EndSerial Port Cabling Serial Port PinoutsCable Adapters RJ45 SignalDB25F SUB-D Female connector Terminal Connector Pin Assignments3 4 Mating face of an RJ45 FemaleDescription Acceptable Value Default Value Appendix a Serimux Port CharacteristicsAppendix B Serimux User and Administrator Characteristics AdministratorIndex Warranty Information
Top Page Image Contents