Disconnect 2 ports | 36 | |
Attach or detach a modem | 36 | |
Reset SERIMUX Console Switch to default settings | 36 | |
4. USING THE TERMINAL | 37 | |
4.1 How To Setup The TERMINAL | 37 | |
4.1.1 Entering TERMINAL Setup | 37 | |
4.1.2 Saving and Exiting Setup | 37 | |
4.1.3 Setup Directory | 37 | |
4.2 | Changing The TERMINAL Operating Parameters | 38 |
F1- Disp SETUP Menu | 38 | |
F2- Genrl SETUP Menu | 38 | |
F3- Keybd SETUP Menu | 39 | |
F4- Comm SETUP Menu | 39 | |
F5- Misc SETUP Menu | 40 | |
40 | ||
F7- FKeys | 40 | |
F8- Ansbk | 41 | |
F9- Lan Setup Menu | 41 | |
F10- Colr1 | 41 | |
F11- Colr2 | 42 | |
4.3 | Local Keyboard Commands | 45 |
4.4 TERMINAL Command Guide | 46 | |
4.4.1 Commands Supported in ASCII Personalities | 46 | |
4.4.2 Variable Values for Table 8 Commands | 53 | |
4.5 | ANSI Command Guide | 57 |
4.5.1 VT100, VT220 and Console ANSI Command Guide | 57 | |
4.5.2 VT52 Command Guide | 64 | |
4.6 | Using Printer Server via Ethernet Connection | 65 |
4.6.1 Basic Setup | 65 | |
4.6.2 Setup for LPD | 66 | |
4.6.3 LPD printing | 67 | |
4.6.4 Setup for TFTP | 67 | |
4.6.5 TFTP Printing | 67 | |
5. HARDWARE INFORMATION | 68 | |
5.1 | Hardware Specifications: TERMINAL | 68 |
5.2 | Hardware Specifications: SERIMUX | 68 |
5.3 | 69 | |
5.4 | Serial Port Cabling | 69 |
5.5 | Serial Port Pinouts | 69 |
5.6 | Cable Adapters | 70 |
5.7 | TERMINAL Connector Pin Assignments | 72 |
INDEX | 74 | |
WARRANTY INFORMATION | 74 |
iii