Network Technologies CS-16/8 operation manual Installation, Rack Mounting Instructions

Page 10

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

1. INSTALLATION

1.1 Rack Mounting Instructions

This NTI switch was designed to be directly mounted in a rack and includes a mounting flange to make attachment easy.

Install 4 cage nuts (supplied) to the rack in locations that line up with the holes (or slots) in the mounting flange on the NTI switch. Then secure the NTI switch to the rack using four #10-32 x3/4” screws (supplied). Each screw should be of sufficient length to go completely through the NTI mounting flange, rack frame and fully engage all threads in the captive nut. Be sure to tighten all mounting screws securely.

Do not block power supply vents in the NTI switch chassis (if provided). Be sure to enable adequate airflow in front of and behind the NTI switch.

Attach all cables securely to the switch and where necessary supply adequate means of strain relief for cables.

#10-32x3/4" Rack Screws (supplied)

Rack

Cage Nuts

(supplied)

Figure 1- Mount Switch in a Rack

Image 10

Contents SERIMUX-TERM-CS-16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Terminal Converter FeaturesIntroduction Multiple RS-232 EmulationsConsole Switch Materials DB25M-RJ45F-C DB9F-RJ45FFeatures and Functions Front and Rear Views of SERIMUX-TERM-CS-16Rack Mounting Instructions Installation#10-32x3/4 Rack Screws supplied Cage Nuts Supplied Powercord Connect Devices, Hosts, and PowerIEC Power Connector RJ45 Male ConnectorConnect the Monitor and Keyboard Power Up The SERIMUX-TERM-CS-16Connect the Serimux and Terminal to a Network MonitorSetup The Terminal Getting StartedF4- Comm Setup Menu Saving and Exiting SetupF2- Genrl Setup Menu Connect to the SerimuxStartup- Accessible host list Terminal Control Using the Serimux Console SwitchDefault keypad PIN number is Serial ControlAdministrator Controls Login as the administratorPort List Port list displays the status of all portsPort Settings Port settings menuSetting Description Value Stop Bit Port serial settingsData bit ParityXon or Xoff Characters Flow control CommandInter-character delay DTR line behaviorDisplay serial settings for different port number Modem settingsCopy Port Serial Settings Function KeystrokePort data buffer Display modem settings for different port numberClear Port data buffer User List User ListUser Settings User settings menuCopy User Settings Port accessOption Description Setting Description Value Advanced SettingsChange administrator password Local KeyPad PIN Defines the PIN number for LocalFunction Description FirmwareLoad new firmware Save current firmware Serimux is waiting to save its firmware User Accessible host list screen User ControlsUser main menu User main menuLimited user accessible Port list Port List screen¾ Accessible host list User Terse modeTerse mode commands ¾ Connect to port ¾ Port info¾ Verbose mode System Reset button¾ User Logout Firmware Upgrade Firmware upload windowLast confirmation before firmware update Functions of the Keypad Login the administratorKeypad Control Action from Keypad Reaction of SerimuxLogin a user to the administrator main menu Login user to a portConnect 2 host ports Disconnect and logout a userAction from Keypad Disconnect 2 ports Reset Serimux Console Switch to default settingsTo detach a modem Using the Terminal How To Setup The TerminalF2- Genrl Setup Menu F1- Disp Setup MenuChanging The Terminal Operating Parameters F4- Comm Setup Menu F3- Keybd Setup MenuPrinter F6-Tabs SET-UP Menu F5- Misc Setup MenuF7- FKeys SET-UP Definition Setup Menu Printer RCV ON/OFFF10- Colr1 Set-up Menu F9- Lan Setup MenuF8- Ansbk SET-UP Menu Programmable KeysAttribute = Bold/Blink Color Association = OFF/ON Color Setup MenuF11- Colr2 Set-up Menu OptionColor Palettes Palette Display Attribute Foreground Color Background ColorColor Palettes Contd Local Keyboard Commands Command Enhanced PCSame Terminal Command GuideCommands Supported in Ascii Personalities WyseStop parity word Native Mode WyseSelect bell volume Key/fkey DELESC . cursor1 Sequence DELKey/fkey Sequence Sequence DEL Message CRFcolor ESC a mf attrAttr Bcolor mapLine col ColCcc C Clearing Data Editing ContdSending data Set Print FunctionsCharacter Sets Pp bb...bbVariable Values for Commands Variable Values for Commands Contd Definition LengthLine/Column Max Maximum SpeedPalette Color Pallette Bell VolumeFunction Key Parity Bits1 VT100, VT220 and Console Ansi Command Guide Ansi Command GuideSupported VT100,VT220 and Console Ansi Commands ESC Ps final Supported VT100, VT220 and Console Ansi Commands, ContdCharacter Set Selection Label assignedValues for Ps above Supported VT100, VT220 and Console Ansi Commands ContdFinal character Character AttributeValues for Psn in table on Editing FunctionsClear Key Lock See tables below an on next page for values Kc/hc ST StringShifted function key Key Value Redefine keys with stringUnshifted function key Values of Fn for Numeric Keypad keysAuxiliary Keypad Modes More Terminal Control CommandsTerminal Resets Transmission/Printer ControlSee table below for values of Ps 2 VT52 Command GuideCommand VT52 Keyboard LanguageUsing Printer Server via Ethernet Connection Basic SetupSetup for LPD LPD printing Setup for TftpTftp Printing Hardware Specifications Serimux Hardware Specifications TerminalHardware Information Serial Port Cabling Pin assignment at Wire Color Standard End Crossed EndCPU-to-RACKMUX Ethernet Crossover Cable Serial Port PinoutsRJ45 Signal Cable AdaptersDB25F 3 4 Terminal Connector Pin AssignmentsSUB-D Female connector Mating face of an RJ45 FemaleAppendix B Serimux User and Administrator Characteristics Appendix a Serimux Port CharacteristicsDescription Acceptable Value Default Value AdministratorWarranty Information Index