Network Technologies CS-16/8 Port List, Port list displays the status of all ports

Page 18

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

3.1.2 Port List

From the Administrator main menu, press [1] to display the Port List.

Figure 9- The Port list displays the status of all ports

The Port list displays the following information:

Column Heading

Description

 

Port

Port number and name

 

Log

Index number of the user logged in at the port

 

Con

The number of another port (Pxx) connected to that port .

If the administrator is

 

logged in, "Adm" will be displayed

 

U/H

Port type- User or Host

 

Mdm

Modem connection status: Y if modem is connected , -

if not

BaudRate

Port transmitter and receiver speed

 

Serial

Character size, parity, and stop bit number

 

Flow

Flow control method- hard (RTS/CTS), soft (Xon/Xoff), both, or none

Xon/Xoff

Special characters used as soft flow control sequence

 

Discon

In-band disconnect sequence (1 character, 3 character, or none)

DscTime

Remaining time until self-disconnection due to port receiver inactivity (see

 

below)

 

13

Image 18
Contents SERIMUX-TERM-CS-16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Terminal Converter FeaturesIntroduction Multiple RS-232 EmulationsConsole Switch Materials DB25M-RJ45F-C DB9F-RJ45FFeatures and Functions Front and Rear Views of SERIMUX-TERM-CS-16Installation Rack Mounting Instructions#10-32x3/4 Rack Screws supplied Cage Nuts Supplied Powercord Connect Devices, Hosts, and PowerIEC Power Connector RJ45 Male ConnectorConnect the Monitor and Keyboard Power Up The SERIMUX-TERM-CS-16Connect the Serimux and Terminal to a Network MonitorSetup The Terminal Getting StartedF4- Comm Setup Menu Saving and Exiting SetupF2- Genrl Setup Menu Connect to the SerimuxStartup- Accessible host list Terminal Control Using the Serimux Console SwitchDefault keypad PIN number is Serial ControlAdministrator Controls Login as the administratorPort List Port list displays the status of all portsPort Settings Port settings menuSetting Description Value Stop Bit Port serial settingsData bit ParityXon or Xoff Characters Flow control CommandInter-character delay DTR line behaviorDisplay serial settings for different port number Modem settingsCopy Port Serial Settings Function KeystrokeDisplay modem settings for different port number Port data bufferClear Port data buffer User List User ListUser Settings User settings menuPort access Copy User SettingsOption Description Setting Description Value Advanced SettingsChange administrator password Local KeyPad PIN Defines the PIN number for LocalFirmware Function DescriptionLoad new firmware Save current firmware Serimux is waiting to save its firmware User Accessible host list screen User ControlsUser main menu User main menuLimited user accessible Port list Port List screen¾ Accessible host list User Terse modeTerse mode commands ¾ Connect to port ¾ Port infoSystem Reset button ¾ Verbose mode¾ User Logout Firmware Upgrade Firmware upload windowLast confirmation before firmware update Functions of the Keypad Login the administratorKeypad Control Action from Keypad Reaction of SerimuxLogin a user to the administrator main menu Login user to a portDisconnect and logout a user Connect 2 host portsAction from Keypad Reset Serimux Console Switch to default settings Disconnect 2 portsTo detach a modem Using the Terminal How To Setup The TerminalF1- Disp Setup Menu F2- Genrl Setup MenuChanging The Terminal Operating Parameters F3- Keybd Setup Menu F4- Comm Setup MenuPrinter F6-Tabs SET-UP Menu F5- Misc Setup MenuF7- FKeys SET-UP Definition Setup Menu Printer RCV ON/OFFF10- Colr1 Set-up Menu F9- Lan Setup MenuF8- Ansbk SET-UP Menu Programmable KeysAttribute = Bold/Blink Color Association = OFF/ON Color Setup MenuF11- Colr2 Set-up Menu OptionColor Palettes Palette Display Attribute Foreground Color Background ColorColor Palettes Contd Local Keyboard Commands Command Enhanced PCSame Terminal Command GuideCommands Supported in Ascii Personalities WyseStop parity word Native Mode WyseSelect bell volume Key/fkey DELESC . cursor1 Sequence DELKey/fkey Sequence Sequence DEL Message CRFcolor ESC a mf attrAttr Bcolor mapCol Line colCcc C Editing Contd Clearing DataSending data Set Print FunctionsCharacter Sets Pp bb...bbVariable Values for Commands Variable Values for Commands Contd Definition LengthLine/Column Max Maximum SpeedPalette Color Pallette Bell VolumeFunction Key Parity BitsAnsi Command Guide 1 VT100, VT220 and Console Ansi Command GuideSupported VT100,VT220 and Console Ansi Commands ESC Ps final Supported VT100, VT220 and Console Ansi Commands, ContdCharacter Set Selection Label assignedValues for Ps above Supported VT100, VT220 and Console Ansi Commands ContdFinal character Character AttributeValues for Psn in table on Editing FunctionsSee tables below an on next page for values Kc/hc ST String Clear Key LockShifted function key Key Value Redefine keys with stringUnshifted function key Values of Fn for Numeric Keypad keysAuxiliary Keypad Modes More Terminal Control CommandsTerminal Resets Transmission/Printer ControlSee table below for values of Ps 2 VT52 Command GuideCommand VT52 Keyboard LanguageUsing Printer Server via Ethernet Connection Basic SetupSetup for LPD Setup for Tftp LPD printingTftp Printing Hardware Specifications Terminal Hardware Specifications SerimuxHardware Information Serial Port Cabling Pin assignment at Wire Color Standard End Crossed EndCPU-to-RACKMUX Ethernet Crossover Cable Serial Port PinoutsRJ45 Signal Cable AdaptersDB25F 3 4 Terminal Connector Pin AssignmentsSUB-D Female connector Mating face of an RJ45 FemaleAppendix B Serimux User and Administrator Characteristics Appendix a Serimux Port CharacteristicsDescription Acceptable Value Default Value AdministratorWarranty Information Index