Network Technologies CS-16/8 operation manual Port List screen, Limited user accessible Port list

Page 33

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

3.2.3 Port List screen

From the "User main menu", press [3] to display the list of user accessible ports and information about these ports. Only the administrator can change the communication settings.


					Figure 23- A limited user accessible Port list
	On consecutive columns, the following are displayed:
	Column			Description
	Port			index number of the port
	Port Name			Name assigned to the port
	Usr/Hst			Port type, user or host
	Modem		Yes if modem is attached, - if not
	BaudRate			Receiving and transmitting speed of the port
	Serial		Character size, parity, and stop bit number
	Flow		Defines flow control method
				• Hard (RTS/CTS or outband)
				• Soft (Xon/Xoff or inband)
				•	Both
				•	None
	Xon/Xoff			Characters used for Xon and Xoff flow control
	Discon			In-band disconnect sequence (1-3 characters, or none)

Press [R] to refresh and re-display the information on the screen.

If the number of user accessible ports is greater than 17,

press [N] to see the next page, press [P] to see the first page.

Press [Esc] or [Space] to return to the "User main menu".

28

Image 33

Contents SERIMUX-TERM-CS-16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Introduction FeaturesTerminal Converter Multiple RS-232 EmulationsConsole Switch DB25M-RJ45F-C DB9F-RJ45F MaterialsFront and Rear Views of SERIMUX-TERM-CS-16 Features and FunctionsInstallation Rack Mounting Instructions#10-32x3/4 Rack Screws supplied Cage Nuts Supplied IEC Power Connector Connect Devices, Hosts, and PowerPowercord RJ45 Male ConnectorConnect the Serimux and Terminal to a Network Power Up The SERIMUX-TERM-CS-16Connect the Monitor and Keyboard MonitorGetting Started Setup The TerminalF2- Genrl Setup Menu Saving and Exiting SetupF4- Comm Setup Menu Connect to the SerimuxStartup- Accessible host list Default keypad PIN number is Using the Serimux Console SwitchTerminal Control Serial ControlLogin as the administrator Administrator ControlsPort list displays the status of all ports Port ListPort settings menu Port SettingsSetting Description Value Data bit Port serial settingsStop Bit ParityInter-character delay Flow control CommandXon or Xoff Characters DTR line behaviorCopy Port Serial Settings Modem settingsDisplay serial settings for different port number Function KeystrokeDisplay modem settings for different port number Port data bufferClear Port data buffer User List User ListUser settings menu User SettingsPort access Copy User SettingsOption Description Change administrator password Advanced SettingsSetting Description Value Local KeyPad PIN Defines the PIN number for LocalFirmware Function DescriptionLoad new firmware Save current firmware Serimux is waiting to save its firmware User Controls User Accessible host list screenUser main menu User main menuPort List screen Limited user accessible Port listTerse mode commands ¾ Connect to port User Terse mode¾ Accessible host list ¾ Port infoSystem Reset button ¾ Verbose mode¾ User Logout Firmware upload window Firmware UpgradeLast confirmation before firmware update Keypad Control Login the administratorFunctions of the Keypad Action from Keypad Reaction of SerimuxLogin user to a port Login a user to the administrator main menuDisconnect and logout a user Connect 2 host portsAction from Keypad Reset Serimux Console Switch to default settings Disconnect 2 portsTo detach a modem How To Setup The Terminal Using the TerminalF1- Disp Setup Menu F2- Genrl Setup MenuChanging The Terminal Operating Parameters F3- Keybd Setup Menu F4- Comm Setup MenuPrinter F7- FKeys SET-UP Definition Setup Menu F5- Misc Setup MenuF6-Tabs SET-UP Menu Printer RCV ON/OFFF8- Ansbk SET-UP Menu F9- Lan Setup MenuF10- Colr1 Set-up Menu Programmable KeysF11- Colr2 Set-up Menu Color Association = OFF/ON Color Setup MenuAttribute = Bold/Blink OptionPalette Display Attribute Foreground Color Background Color Color PalettesColor Palettes Contd Command Enhanced PC Local Keyboard CommandsCommands Supported in Ascii Personalities Terminal Command GuideSame WyseSelect bell volume Native Mode WyseStop parity word Key/fkey DELKey/fkey Sequence Sequence DEL Sequence DELESC . cursor1 Message CRAttr ESC a mf attrFcolor Bcolor mapCol Line colCcc C Editing Contd Clearing DataSending data Character Sets Print FunctionsSet Pp bb...bbVariable Values for Commands Variable Values for Commands Contd Line/Column LengthDefinition Max Maximum SpeedFunction Key Bell VolumePalette Color Pallette Parity BitsAnsi Command Guide 1 VT100, VT220 and Console Ansi Command GuideSupported VT100,VT220 and Console Ansi Commands Character Set Selection Supported VT100, VT220 and Console Ansi Commands, ContdESC Ps final Label assignedFinal character Supported VT100, VT220 and Console Ansi Commands ContdValues for Ps above Character AttributeEditing Functions Values for Psn in table onSee tables below an on next page for values Kc/hc ST String Clear Key LockShifted function key Unshifted function key Redefine keys with stringKey Value Values of Fn for Numeric Keypad keysTerminal Resets More Terminal Control CommandsAuxiliary Keypad Modes Transmission/Printer ControlCommand VT52 2 VT52 Command GuideSee table below for values of Ps Keyboard LanguageBasic Setup Using Printer Server via Ethernet ConnectionSetup for LPD Setup for Tftp LPD printingTftp Printing Hardware Specifications Terminal Hardware Specifications SerimuxHardware Information CPU-to-RACKMUX Ethernet Crossover Cable Pin assignment at Wire Color Standard End Crossed EndSerial Port Cabling Serial Port PinoutsCable Adapters RJ45 SignalDB25F SUB-D Female connector Terminal Connector Pin Assignments3 4 Mating face of an RJ45 FemaleDescription Acceptable Value Default Value Appendix a Serimux Port CharacteristicsAppendix B Serimux User and Administrator Characteristics AdministratorIndex Warranty Information