Quatech DSE-410D manual Dimensions, Optional Accessories, Configuration Options

Page 12

Dimensions

3.35 x 4.5 x 0.90 in (8.5 x 11.5 x 2.3 cm)

Hardware and Included Accessories DSE-410D Ethernet Serial Device Server

Power Supply: 12VDC/500mA (tip positive/sleeve negative)

Area Dependent: US power plug (120VAC/60Hz) or International AC plug (220/240VAC/50Hz)

Manual (paper copy of this manual)

CD-ROM disc with software for Windows 98/ME/NT/2000/XP and Quatech DSE-410D Manager/Virtual COM Driver software

Optional Accessories

DSE-410D-DIN: Mounting clips for 35mm DIN Rail

Configuration Options

Console Mode using RS-232 with VT100 emulation Telnet using VT100 emulation

Software for Console Mode or Telnet not included, can use HyperTerminal with Windows

Quatech DSE-410D Manager using Windows 98/ME/NT/2000/XP DSE-410D Manager software includes Search for Quatech DSE-410D on network, Configure Server Properties, Add/Remove Virtual COM port in Windows, and Firmware download for future revisions

6

DSE-410D Owner’s Manual – Document Number: 940-0186-100

Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000

http://www.quatech.com

Image 12
Contents Model DSE-410D World HeadquartersPage Table of Contents Server Name Password Searching LAN for DSE-410DMAC Address Installing Virtual Com Port Page Features IntroductionDirect IP Mode Virtual COM ModeCommunication Modes Heart Beat Connection Quick StartDefault DSE-410D Settings DhcpSpecifications Dimensions Optional AccessoriesConfiguration Options Side View when vertically mounted HardwareEthernet Connection Light IndicationPower Connection Reset ButtonMode Switches DSE-410D Server Port Top ViewRS-485 Mode RS-422 ModeRS-232 Mode Default SettingSerial Connections RS-232 Connections RS-422 Connections RS-485 Connections Page Install Quatech DSE-410D Software Page Page Page Using DSE-410D Manager Searching LAN for DSE-410DFirmware Upgrade Virtual COM ConfigurationUninstall Virtual COM Searching ServerProtocol COM NameStatus Server Properties ScreenNext chapter Server Properties Configuration Password Server NameIP Address, Netmask, and Gateway Properties Link Status Shown in Telnet or Console mode only MAC AddressServer Serial Port Select 1 or Baud Rate Set for each portConnection Mode Set for each port Flow Control Set for each portTCP/UDP Protocol Set for each port TCP/UDP Port Set for each portUpdate Page Installing Virtual Com Port Page Page Use Device Manager to View New Ports Page Page Removing a Virtual Com Port Removing the Virtual COM Port using Device Manager Page Page Upgrade Mode Using Virtual COM or Serial ConnectionsPage Page Page Console Mode Setup Page Appendix a RS-232, RS-422 Loopback Connections Page Appendix B RS-232 Connections DB9MRS-232 Connections cont’d Signal Name Direction Pin Appendix C RS-422 ConnectionsRS-422 Connections cont’d Appendix D RS-485 Connections Page Appendix E Warranty Date of Purchase Model Number