Quatech DSE-410D manual

Page 44

38	DSE-410D Owner’s Manual – Document Number: 940-0186-100

Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000

http://www.quatech.com

Image 44

Contents Model DSE-410D World HeadquartersPage Table of Contents MAC Address Server Name PasswordSearching LAN for DSE-410D Installing Virtual Com Port Page Features IntroductionCommunication Modes Direct IP ModeVirtual COM Mode Heart Beat Connection Quick StartDefault DSE-410D Settings DhcpSpecifications Configuration Options DimensionsOptional Accessories Side View when vertically mounted HardwareEthernet Connection Light IndicationPower Connection Reset ButtonMode Switches DSE-410D Server Port Top ViewRS-485 Mode RS-422 ModeRS-232 Mode Default SettingSerial Connections RS-232 Connections RS-422 Connections RS-485 Connections Page Install Quatech DSE-410D Software Page Page Page Using DSE-410D Manager Searching LAN for DSE-410DFirmware Upgrade Virtual COM ConfigurationUninstall Virtual COM Searching ServerProtocol COM NameStatus Server Properties ScreenNext chapter Server Properties Configuration IP Address, Netmask, and Gateway Properties PasswordServer Name Link Status Shown in Telnet or Console mode only MAC AddressServer Serial Port Select 1 or Baud Rate Set for each portConnection Mode Set for each port Flow Control Set for each portTCP/UDP Protocol Set for each port TCP/UDP Port Set for each portUpdate Page Installing Virtual Com Port Page Page Use Device Manager to View New Ports Page Page Removing a Virtual Com Port Removing the Virtual COM Port using Device Manager Page Page Upgrade Mode Using Virtual COM or Serial ConnectionsPage Page Page Console Mode Setup Page Appendix a RS-232, RS-422 Loopback Connections Page Appendix B RS-232 Connections DB9MRS-232 Connections cont’d Signal Name Direction Pin Appendix C RS-422 ConnectionsRS-422 Connections cont’d Appendix D RS-485 Connections Page Appendix E Warranty Date of Purchase Model Number