Quatech DSE-410D manual

Page 6

iv	DSE-410D Owner’s Manual – Document Number: 940-0186-100

Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000

http://www.quatech.com

Image 6

Contents Model DSE-410D World HeadquartersPage Table of Contents Server Name Password Searching LAN for DSE-410DMAC Address Installing Virtual Com Port Page Features IntroductionDirect IP Mode Virtual COM ModeCommunication Modes Heart Beat Connection Quick StartDefault DSE-410D Settings DhcpSpecifications Dimensions Optional AccessoriesConfiguration Options Ethernet Connection Side View when vertically mountedHardware Light IndicationMode Switches DSE-410D Server Port Power ConnectionReset Button Top ViewRS-232 Mode RS-485 ModeRS-422 Mode Default SettingSerial Connections RS-232 Connections RS-422 Connections RS-485 Connections Page Install Quatech DSE-410D Software Page Page Page Using DSE-410D Manager Searching LAN for DSE-410DUninstall Virtual COM Firmware UpgradeVirtual COM Configuration Searching ServerStatus ProtocolCOM Name Server Properties ScreenNext chapter Server Properties Configuration Password Server NameIP Address, Netmask, and Gateway Properties Server Serial Port Select 1 or Link Status Shown in Telnet or Console mode onlyMAC Address Baud Rate Set for each portTCP/UDP Protocol Set for each port Connection Mode Set for each portFlow Control Set for each port TCP/UDP Port Set for each portUpdate Page Installing Virtual Com Port Page Page Use Device Manager to View New Ports Page Page Removing a Virtual Com Port Removing the Virtual COM Port using Device Manager Page Page Upgrade Mode Using Virtual COM or Serial ConnectionsPage Page Page Console Mode Setup Page Appendix a RS-232, RS-422 Loopback Connections Page Appendix B RS-232 Connections DB9MRS-232 Connections cont’d Signal Name Direction Pin Appendix C RS-422 ConnectionsRS-422 Connections cont’d Appendix D RS-485 Connections Page Appendix E Warranty Date of Purchase Model Number