Quatech DSE-410D manual

Page 36

2.The program searches the LAN for all available DSE-410D Servers when it starts, then displays a list of those found in the Found Server window. Highlight the Server at the IP Address you wish to use, and then select OK.

3.After the COMInst window opens, select the desired COM # in the Map To: options.

4.Windows XP may provide a notice concerning Windows Logo testing for XP.

This XP feature simply indicates that these drivers have not yet undergone the Microsoft testing procedures required to use the Windows XP Logo on the packaging. Driver compatibility is not affected.

Select “Continue anyway” to proceed with the installation.

30	DSE-410D Owner’s Manual – Document Number: 940-0186-100

Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000

http://www.quatech.com

Image 36

Contents Model DSE-410D World HeadquartersPage Table of Contents Server Name Password Searching LAN for DSE-410DMAC Address Installing Virtual Com Port Page Features IntroductionDirect IP Mode Virtual COM ModeCommunication Modes Heart Beat Connection Quick StartDefault DSE-410D Settings DhcpSpecifications Dimensions Optional AccessoriesConfiguration Options Side View when vertically mounted HardwareEthernet Connection Light IndicationPower Connection Reset ButtonMode Switches DSE-410D Server Port Top ViewRS-485 Mode RS-422 ModeRS-232 Mode Default SettingSerial Connections RS-232 Connections RS-422 Connections RS-485 Connections Page Install Quatech DSE-410D Software Page Page Page Using DSE-410D Manager Searching LAN for DSE-410DFirmware Upgrade Virtual COM ConfigurationUninstall Virtual COM Searching ServerProtocol COM NameStatus Server Properties ScreenNext chapter Server Properties Configuration Password Server NameIP Address, Netmask, and Gateway Properties Link Status Shown in Telnet or Console mode only MAC AddressServer Serial Port Select 1 or Baud Rate Set for each portConnection Mode Set for each port Flow Control Set for each portTCP/UDP Protocol Set for each port TCP/UDP Port Set for each portUpdate Page Installing Virtual Com Port Page Page Use Device Manager to View New Ports Page Page Removing a Virtual Com Port Removing the Virtual COM Port using Device Manager Page Page Upgrade Mode Using Virtual COM or Serial ConnectionsPage Page Page Console Mode Setup Page Appendix a RS-232, RS-422 Loopback Connections Page Appendix B RS-232 Connections DB9MRS-232 Connections cont’d Signal Name Direction Pin Appendix C RS-422 ConnectionsRS-422 Connections cont’d Appendix D RS-485 Connections Page Appendix E Warranty Date of Purchase Model Number