Quatech DSE-410D manual

Page 43

2.Select Device Manager in the Systems Properties window. In the Device Manger window select the + next to Ports (COM & LPT) to expand.

3.Highlight DSE-410D (COM #) to be removed, go the Action tab at the top of window and select uninstall. A confirm Device Removal window will appear. Select OK to procedure.

4.The DSE-410D COM # will be removed and the Device Manager window will refresh and display the remaining COM ports.

Document Number: 940-0186-100 – DSE-410D Owner’s Manual

37

Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000

http://www.quatech.com

Image 43

Contents World Headquarters Model DSE-410DPage Table of Contents Searching LAN for DSE-410D Server Name PasswordMAC Address Installing Virtual Com Port Page Introduction FeaturesVirtual COM Mode Direct IP ModeCommunication Modes Quick Start Heart Beat ConnectionDhcp Default DSE-410D SettingsSpecifications Optional Accessories DimensionsConfiguration Options Light Indication Side View when vertically mountedHardware Ethernet ConnectionTop View Power ConnectionReset Button Mode Switches DSE-410D Server PortDefault Setting RS-485 ModeRS-422 Mode RS-232 ModeSerial Connections RS-232 Connections RS-422 Connections RS-485 Connections Page Install Quatech DSE-410D Software Page Page Page Searching LAN for DSE-410D Using DSE-410D ManagerSearching Server Firmware UpgradeVirtual COM Configuration Uninstall Virtual COMServer Properties Screen ProtocolCOM Name StatusNext chapter Server Properties Configuration Server Name PasswordIP Address, Netmask, and Gateway Properties Baud Rate Set for each port Link Status Shown in Telnet or Console mode onlyMAC Address Server Serial Port Select 1 orTCP/UDP Port Set for each port Connection Mode Set for each portFlow Control Set for each port TCP/UDP Protocol Set for each portUpdate Page Installing Virtual Com Port Page Page Use Device Manager to View New Ports Page Page Removing a Virtual Com Port Removing the Virtual COM Port using Device Manager Page Page Using Virtual COM or Serial Connections Upgrade ModePage Page Page Console Mode Setup Page Appendix a RS-232, RS-422 Loopback Connections Page DB9M Appendix B RS-232 ConnectionsRS-232 Connections cont’d Appendix C RS-422 Connections Signal Name Direction PinRS-422 Connections cont’d Appendix D RS-485 Connections Page Appendix E Warranty Date of Purchase Model Number