Using the menus
The projector is equipped with
Below is the overview of the OSD menu.
Main menu icon
Main menu
Highlight
Current input signal
Status
Press MENU/ EXIT to the previous page or to exit.
The following example describes how to set the OSD language.
1.Press MENU/EXIT on the projector or remote control to turn the OSD menu on.
3.Press 
to highlight Language and press Enter to select a preferred language.
2.Use 
/ 
to highlight the SYSTEM SETUP: Basic menu.
4.Press MENU/EXIT twice* on the projector or remote control to leave and save the settings.
*The first press leads you back to the main menu and the second press closes the OSD menu.
28 Operation