Personalizing the projector menu display
The
•Menu display Time in the SYSTEM SETUP: Basic > Menu Settings menu sets the length of time the OSD will remain active after your last key press. The time length
ranges from 5 to 30 seconds in 
/ 
to select a suitable time frame.
•Menu Position in the SYSTEM SETUP: Basic > Menu Settings menu sets the OSD position in five locations. Use 
/ 
to select a preferred position.
•Language in the SYSTEM SETUP: Basic menu sets your familiar language for the OSD menus. Use Enter to select your language.
•Reminder Message in the SYSTEM SETUP: Basic > Menu Settings menu sets
whether to display reminder messages on screen. Use 
/ 
to select your desired setting.
•Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen to be displayed during projector 
/ 
to select a screen.
Select the lamp saver mode
•Using the remote control.
Press SmartEco and Highlight Lamp Mode and press 
/ 
to select Normal/ Economic/SmartEco/LampSave.
•Using the OSD menu.
1.Press Menu/Exit and then press 
/ 
until the SYSTEM SETUP: Advanced menu is highlighted.
2. Press 
to highlight Lamp Mode and press
Mode/Enter. The Lamp Settings page displays.
3.Highlight Lamp Mode and press 
/ 
to
select Normal/Economic/SmartEco/LampSave. The lamp brightness vary from the different lamp mode,see the description list in table below.
Lamp Mode | Description | |
|
| |
Normal | 100% lamp brightness. | |
|
| |
Economic | Saves 20% lamp power consumption. | |
|
| |
SmartEco | Saves up to 80% lamp power consumption depending on the content | |
brightness level and keeps the image as bright as it is in normal mode. | ||
| ||
|
| |
LampSave | Saves up to 80% lamp power consumption to offer the longest lamp | |
life. | ||
| ||
|
|
If the Economic mode or SmatEco mode is selected, the light output will be reduced and result in darker projected pictures.
44 Operation