Random Access Adjustment Mode
Side Keystone
The side keystone adjustment is used to align the image if the projector is mounted at a nonstandard projection angle.
To align the keystone :
1Push the cursor key or to highlight 'Side Keystone'.
2 Press ENTER to select.
3 Push the cursor key or to adjust the keystone of the image.
When the upper part of the image is wider than the lower part of the image, push the cursor key . The number indication below the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the image, push the cursor key . The number indication below the bar scale will be positive.
Blanking
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwanted information (or noise). A '0' on the bar scale indicates no blanking.
To adjust the blanking :
1Push the cursor key or to highlight 'Blanking'.
2 Press ENTER to display the blanking menu.
The following blanking corrections are possible :
-top blanking
-bottom blanking
-left blanking
-right blanking
Top blanking
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with | or |
then <ENTER> | |
<EXIT> to | return. |
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with | or |
|
then <ENTER> |
| |
<EXIT> to | BLANKING | |
| TOP | |
| BOTTOM | |
| LEFT | |
| RIGHT | |
| Select with | or |
| then <ENTER> | |
| <EXIT> to | return. |
Left blanking
Right blanking
Bottom blanking
| 5976052 BARCOREALITY 9300 070999 | |
|