Barco R9001560 manual Front Panel Terminology, Control Panel Terminology a. Local keypad

							Location and Functions of Control
3	LOCATION AND FUNCTIONS OF CONTROL￿￿
Front Panel Terminology		￿￿	￿￿	￿￿￿￿￿9
		0￿I	￿￿￿￿￿￿￿￿￿￿￿￿￿￿+]$		￿￿￿		￿	￿
					PROJECTOR MODE :
					GREEN - OPERATION	DIAGNOSTICS		SD I IN ￿￿SDI OUT￿￿
		RS232 O UT	RS 232 IN	COMMUNICATION PORT	RED - STANDBY	IR-ACKNOWLEDGED CODE	IR-RECEIVER
				(800-PERIPHERALS) REMOTE
						IR-RECEIVED

1	RS232 IN : to allow communication with external compu-
	ter, e.g. IBM PC or compatible, Macintosh ...

RS232 OUT : used to connect to next projector, RS232IN

2 plug (communication link for PC or MAC to the next projector).

3	Communication port : allows communication with the
	800 peripherals.

Diagnostics code : a) source number

8 b) error code : a two digit error code is displayed when something goes wrong inside the projector.

9	IR receiver : receiver for control signals transmitted from
	the RCU.

10Power switch : '1' = on, '0' = off

4Remote : remote input for wired remote control.

Projector mode indication : indicates the status of the

5 projector.

Light off : power switch is not pressed.

11

12

Power input : autoranging from 200 to 240 Vac.

Identification plate : name, serial number, art. number.

Voltage identification plate : name, art. number.

SDI IN - SDI OUT (option): Serial digital input and loop trough

Red light : power switch is pressed, projector in stand by mode.

Green light : projector in operational mode.

6IR-Acknowledged : IR signals are recognized.

7IR-Received : IR signals are received but not recognized by the projector.

13output.

2 x BNC terminals.

14Hardwired remote CTRL2 : remote input via XLR plug.

Control Panel Terminology a. Local keypad

Gaining access

The keypad is located behind a door, screened with the name of the projector.

To open the door, push once on the indicated side of the door and turn it to the front side of the projector.

5976052 BARCOREALITY 9300 070999 3-1