InFocus IN12 manual Rcv, Normal, Still Image

Setting Name	Input	Setting	Description
		Unit
Vertical	RCV	Signal	Use this sub-menu to adjust the vertical position of the
Position		Specific	input source image within the projection area.
Horizontal	RCV	Signal	Use this sub-menu to adjust the horizontal position of the
Position		Specific	input source image within the projection area.
Frequency	R	Signal	When vertical bands appear in the projected image while
		Specific	RGB is selected as the input source, it means that the
			frequency setting is not correct. When this happens, use
			this setting to adjust the frequency manually.

			Important!
			If, for some reason, your manual frequency settings
			cause the image input from the computer to
			disappear from the projection, you can press the
			[AUTO] key to perform an auto adjust operation,
			which should cause the image to appear.
Phase	R	Signal	When there is flickering in the projected image while RGB
		Specific	is selected as the input source, it means that the phase
			setting is not correct. When this happens, use this setting
			to adjust the phase manually.
Video Mode	V	Source	This setting is valid when VIDEO is selected as the input
		Specific	source. Use it to select a mode that is optimized for
			movies or still images.
			Normal*:
			Optimized for movies.
			Still Image:
			Optimized for still images. In particular, this setting
			should be used when projecting still images from a
			digital camera connected to the projector’s VIDEO
			terminal.
Restore Menu	RCVU	Source	Use this sub-menu to return all of the sub-menu items on
Defaults		Specific	the Image Adjustment main menu to their initial default
			settings.
			z Restoring menu defaults when there is no input signal
			will restore defaults for the currently selected input
			source.
			z “Image Adjustment” main menu “Vertical Position”,
			“Horizontal Position”, “Frequency”, and “Phase” defaults
			can be restored for the current signal type (XGA/60Hz,
			SXGA/60Hz,etc.) only.

15