InFocus IN12 About this manual, Enter, Focus S, Focus T

Page 3

Replacing the Lamp

26

To check the current lamp use time

26

When to replace the lamp

27

Replacing the Lamp

27

To replace the lamp

28

Resetting the Lamp Time

29

To reset the lamp time

30

To reset the lamp time after exceeding the lamp life

30

Appendix

31

Remote Controller Signal Range

31

Connecting to a Component Video Output Device

32

Full-screen Display of an RGB Image

33

Reattaching the Lens Cover

34

About this manual...

zAll of the operations in this manual are explained using the remote controller that comes

with the projector. The following key operations can also be performed on the projector

instead of the remote controller: [MENU], [S], [T], [X], [W], [ENTER], [ESC], [ ], [INPUT], [AUTO], [ZOOM +], [ZOOM –], [FOCUS S], [FOCUS T].

To perform this remote

Use this projector button:

controller operation:

 

 

 

[ENTER]

Button in the center of the cursor keys

 

 

[ZOOM +], [ZOOM –]

[ZOOM] button in combination with the [W] and [X] buttons

 

 

[FOCUS S], [FOCUS T]

[FOCUS] button in combination with the [S] and [T] buttons

 

 

2

Image 3
Contents Page Contents About this manual EnterFocus S, Focus T Image Operations During Projection Adjusting Image BrightnessTo adjust image brightness Operation During ProjectionSelecting the Color Mode To change the color modeZooming an Image Press the Blank key Momentarily Cutting Off the Input Source ImageFreezing an Image To freeze the projected imageTo clear the pointer from the image Displaying a Pointer in the Projected ImageTo display a pointer in the image To select the pointer typeEco Mode To turn the Eco Mode on or offChanging the aspect ratio of the projected image Using the Func Key Adjust image brightnessTurn the Eco Mode on or off Configuring Setup Menu Settings Configuring Advanced Projector SettingsBasic Setup Menu Operations Displaying the Setup MenuBasic Setup Menu Example To configure the Image Adjustment J Contrast settingTo configure the Image Adjustment J Color Mode setting To configure the Option Settings 1 J Eco Mode setting Page Setup Menu Contents Image Adjustment Main Menu RCV NormalStill Image 169 Screen Settings Main MenuAbout the Signal Specific Setting Unit RcvunBlack LogoNone BlueBlank Screen Ntsc / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 Input Settings Main MenuAuto ComponentOption Settings 1 Main Menu Setting Name Description Input Unit Option Settings 2 Main Menu Arrow 1* / Arrow 2 / Bar 1 / Bar 2 / Oval 1 / OvalSpot 1 / Spot Operational Info Main Menu RCV N Restore All Defaults Main MenuCleaning the Lens User MaintenanceCleaning the Projector Cleaning the Projector ExteriorTo check the current lamp use time Replacing the LampReplacing the Lamp When to replace the lampLoosen the three screws indicated by an S mark To replace the lampResetting the Lamp Time To reset the lamp time after exceeding the lamp life To reset the lamp timeAppendix Remote Controller Signal RangeConnecting to a Component Video Output Device Full-screen Display of an RGB Image Input Signal Example Projected ImageReattaching the Lens Cover