InFocus IN12 manual Screen Settings Main Menu, About the Signal Specific Setting Unit, Rcvun, 169

About the “Signal Specific” Setting Unit

For the items that have “Signal Specific” in the “Setting Unit” column of the above table, the setting is saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is being input when the setting is performed, and not for a specific input source.

Screen Settings Main Menu

Setting Name	Input	Setting	Description
		Unit
Keystone	RCVUN	Single	Use this sub-menu to correct vertical keystoning of the
Correction			projected image.
Aspect Ratio	CV	Source	Use this sub-menu to select one of the following aspect
		Specific	ratios for the projected image.
			4:3*:
			This setting specifies a 4:3 aspect ratio, which is the
			same as a standard television.
			16:9:
			This setting specifies a 16:9 aspect ratio, which is the
			same as a movie screen, high-definition TV, etc. Using
			this setting when the input source image is a 16:9 image
			that has been squeezed to a 4:3 image causes the
			image to be projected with its normal 16:9 aspect ratio.

Note

When the input source is a component signal with an aspect ratio of 16:9, the aspect ratio switches automatically to 16:9. When this happens, the aspect ratio cannot be changed using this setting.

Important!

Note that enlarging or reducing the size of an image for commercial purposes or public presentation may infringe on the legally protected copyright of the copyright holder of the original material.

16