Momentarily Cutting Off the Input Source Image
1
2
Press the [BLANK] key.
zThis temporarily cuts off the image from the input source and projects a black screen in its place.
To resume projection of the image from the input source, press the [BLANK] key (or [ESC] key).
Note
You can specify projection of a black screen or blue screen, or a logo. For details, see “Blank Screen” under “Screen Settings Main Menu” on page 18.
Freezing an Image
Pressing the [FREEZE] key freezes the projected image.
To freeze the projected image
1 Whilekey. an image is being projected from an input source, press the [FREEZE]
zThis will capture the image that is on the screen at the moment you press [FREEZE] and stores it in projector memory. That image remains projected on the screen.
2 To restore projection of the image from an input source, press the [ESC] key.
5