InFocus IN12 Option Settings 2 Main Menu, Arrow 1* / Arrow 2 / Bar 1 / Bar 2 / Oval 1 / Oval

Page 23

Option Settings 2 Main Menu

Setting Name

Input

Setting

Description

Unit

 

 

 

 

 

 

 

Zoom Memory

RCVUN

Single

Use this sub-menu to turn zoom memory on or off. Zoom

 

 

 

memory lets you save the zoom setting when the

 

 

 

projector is turned off, so it can be restored automatically

 

 

 

the next time the projector is turned on.

 

 

 

On*:

 

 

 

Select this option when you want to restore the zoom

 

 

 

setting that was in effect when the projector was last

 

 

 

turned off, whenever it is turned on.

 

 

 

Off:

 

 

 

Select this option when you want the image to be

 

 

 

projected at its maximum size whenever you turn on the

 

 

 

projector.

 

 

 

 

Pointer

RCVUN

Single

Use this sub-menu to specify the type of pointer that

 

 

 

appears first when you press the [POINTER] key.

 

 

 

Arrow 1* / Arrow 2 / Bar 1 / Bar 2 / Oval 1 / Oval 2 /

 

 

 

Spot 1 / Spot 2

 

 

 

 

Restore Menu

RCVUN

Single

This sub-menu returns all of the sub-menu items on the

Defaults

 

 

Option Settings 2 main menu to their initial default

 

 

 

settings.

 

 

 

 

22

Image 23
Contents Page Contents Focus S, Focus T About this manualEnter Image Operations During Projection Adjusting Image BrightnessTo adjust image brightness Operation During ProjectionZooming an Image Selecting the Color ModeTo change the color mode Press the Blank key Momentarily Cutting Off the Input Source ImageFreezing an Image To freeze the projected imageTo clear the pointer from the image Displaying a Pointer in the Projected ImageTo display a pointer in the image To select the pointer typeChanging the aspect ratio of the projected image Eco ModeTo turn the Eco Mode on or off Turn the Eco Mode on or off Using the Func KeyAdjust image brightness Configuring Setup Menu Settings Configuring Advanced Projector SettingsBasic Setup Menu Operations Displaying the Setup MenuTo configure the Image Adjustment J Color Mode setting Basic Setup Menu ExampleTo configure the Image Adjustment J Contrast setting To configure the Option Settings 1 J Eco Mode setting Page Setup Menu Contents Image Adjustment Main Menu Still Image RCVNormal 169 Screen Settings Main MenuAbout the Signal Specific Setting Unit RcvunBlack LogoNone BlueBlank Screen Ntsc / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 Input Settings Main MenuAuto ComponentOption Settings 1 Main Menu Setting Name Description Input Unit Spot 1 / Spot Option Settings 2 Main MenuArrow 1* / Arrow 2 / Bar 1 / Bar 2 / Oval 1 / Oval Operational Info Main Menu RCV N Restore All Defaults Main MenuCleaning the Lens User MaintenanceCleaning the Projector Cleaning the Projector ExteriorTo check the current lamp use time Replacing the LampReplacing the Lamp When to replace the lampLoosen the three screws indicated by an S mark To replace the lampResetting the Lamp Time To reset the lamp time after exceeding the lamp life To reset the lamp timeAppendix Remote Controller Signal RangeConnecting to a Component Video Output Device Full-screen Display of an RGB Image Input Signal Example Projected ImageReattaching the Lens Cover