InFocus IN12 manual Image Adjustment Main Menu

Image Adjustment Main Menu

Setting Name	Input	Setting	Description
		Unit
Brightness	RCVU	Source	Use this sub-menu to adjust the brightness of the
		Specific	projected image. A larger value produces a brighter
			image.
Contrast	RCVU	Source	Use this sub-menu to adjust the contrast of the projected
		Specific	image. A larger value produces a stronger contrast.
Sharpness	V	Source	Use this sub-menu to adjust the sharpness of the outlines
		Specific	in the projected image. A larger value makes the image
			sharper, while a smaller value makes it softer.
Saturation	V	Source	Use this sub-menu to adjust the color saturation of the
		Specific	projected image. A larger value increases color saturation.
Tint	V	Source	Use this sub-menu to adjust the tint of the projected
		Specific	image. A larger value makes the overall image more
			bluish, while a smaller value makes the overall image
			more reddish. This setting is supported only when the
			signal is NTSC or NTSC4.43.
Color Mode	RCVU	Source	You can select from among five different color mode
		Specific	settings to optimize the projected image in accordance
			with image contents and projection conditions.
			Presentation*:
			Use this setting for standard presentations in a well-lit
			area. This is the initial default setting when the input
			source is RGB.
			Standard:
			Use this setting when you want to highlight the colors of
			your presentation.
			Graphics:
			Use this setting when you want photographs and graphics
			to appear natural.
			Theater*:
			Use this setting to bring out the dark portions of your
			images. This is the initial default setting when the input
			source is either component video or video.
			Blackboard:
			Use this setting for easy viewing when projecting onto a
			blackboard.
Color Balance	RCVU	Source	This sub-menu lets you adjust the color balance of the
		Specific	projected image. Color balance lets you select either
			“Color Temperature” or “Color” (for individual adjustment of
			red, green and blue) as the adjustment method.
			Color Temperature:
			Select this option when you want to adjust the color
			temperature. Selecting “LO” gives whites a reddish cast,
			while “HI” gives them a bluish cast. Selecting “NORM*”
			sets a medium setting between the two colors.
			Color:
			Select this option when you want to individually adjust the
			intensity of red, green, and blue. For all of the colors, a
			larger value makes the color stronger.

14