InFocus IN12 manual Restore All Defaults Main Menu, Rcv N

Page 25

Restore All Defaults Main Menu

	Setting Name	Input	Setting	Description
	Setting Name	Input	Unit	Description
			Unit

	Restore All	RCV N	Single	This sub-menu returns all sub-menu items on all main
	Defaults			menus to their initial default settings. This operation can
				be performed regardless of the currently selected input
				source and regardless of whether or not a signal is
				currently being input. For details about this procedure, see
				“To restore all settings on the setup menu to their initial
				factory defaults” on page 13.

	Unit Operating	RCVUN	Single	This sub-menu item shows the cumulative operating time
	Time			of this unit. This time cannot be initialized.

24

Image 25

Contents Page Contents Enter About this manualFocus S, Focus T To adjust image brightness Adjusting Image BrightnessOperation During Projection Image Operations During ProjectionTo change the color mode Selecting the Color ModeZooming an Image Freezing an Image Momentarily Cutting Off the Input Source ImageTo freeze the projected image Press the Blank keyTo display a pointer in the image Displaying a Pointer in the Projected ImageTo select the pointer type To clear the pointer from the imageTo turn the Eco Mode on or off Eco ModeChanging the aspect ratio of the projected image Adjust image brightness Using the Func KeyTurn the Eco Mode on or off Basic Setup Menu Operations Configuring Advanced Projector SettingsDisplaying the Setup Menu Configuring Setup Menu SettingsTo configure the Image Adjustment J Contrast setting Basic Setup Menu ExampleTo configure the Image Adjustment J Color Mode setting To configure the Option Settings 1 J Eco Mode setting Page Setup Menu Contents Image Adjustment Main Menu Normal RCVStill Image About the Signal Specific Setting Unit Screen Settings Main MenuRcvun 169None LogoBlue BlackBlank Screen Auto Input Settings Main MenuComponent Ntsc / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60Option Settings 1 Main Menu Setting Name Description Input Unit Arrow 1* / Arrow 2 / Bar 1 / Bar 2 / Oval 1 / Oval Option Settings 2 Main MenuSpot 1 / Spot Operational Info Main Menu RCV N Restore All Defaults Main MenuCleaning the Projector User MaintenanceCleaning the Projector Exterior Cleaning the LensTo check the current lamp use time Replacing the LampReplacing the Lamp When to replace the lampLoosen the three screws indicated by an S mark To replace the lampResetting the Lamp Time To reset the lamp time after exceeding the lamp life To reset the lamp timeAppendix Remote Controller Signal RangeConnecting to a Component Video Output Device Full-screen Display of an RGB Image Input Signal Example Projected ImageReattaching the Lens Cover