InFocus IN12 manual Input Settings Main Menu, Auto, Component, Off

Input Settings Main Menu

Setting Name	Input		Setting	Description
			Unit
RGB Input	RC	N	Single	Use this sub-menu to specify manually the type of signal
				being input from the projector’s RGB input terminal.
				Auto*:
				Automatically detects the signal being input from the RGB
				input terminal and configures the appropriate input
				protocol.
				RGB:
				Select this option when a computer is connected to the
				RGB input terminal. For details about connecting a
				computer, see “Connecting a Computer to the Projector”
				in the “User’s Guide”.
				Component:
				Select this setting when the projector’s RGB input terminal
				is connected to the component video output terminal of a
				video device using an optionally available YK-3 component
				video cable. For information about connection, see
				“Connecting to a Component Video Output Device” on
				page 32.
Video Signal	V	N	Single	Use this sub-menu to specify manually the type of signal
				being input from the projector’s VIDEO input terminal.
				Auto*:
				Select this setting to have the projector switch the video
				signal system automatically in accordance with the input
				signal from the video device that is connected to the
				VIDEO input terminal.
				NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 /
				SECAM:
				Each setting selects the applicable video system. Use
				these settings when you want to specify only one specific
				video signal for the VIDEO input terminal.
Signal Name	RCVUN		Single	Use this sub-menu to specify whether or not the name of
Indicator				the currently selected signal source should be displayed in
				the projected image.
				On*:
				Select this option to turn on display of the name of the
				currently selected signal source in the projected image.
				Off:
				Select this option to turn off display of the signal source
				name.
Restore Menu	RCVUN		Source	Use this sub-menu to return all of the sub-menu items on
Defaults			Specific	the Input Settings main menu to their initial default
				settings.
				z Restoring menu defaults when there is no input signal
				will restore defaults for the currently selected input
				source.
				z Note that the “Signal Name Indicator” setting is always
				returned to its initial default, regardless of the currently
				selected input source.

19