Meridian America D-ILA 1080MF1 Lens Shift Setting, Adjust the projection screen position

Page 19

Lens Shift Setting

This unit comes with a Lens Shift feature that enables upward/downward adjustment of the projection screen position. Adjust accordingly depending on the installation conditions.

•The shift level is between 0 % and 60 %. The shift level is set to 50 % as the default.

•The position of the projection screen may be out of alignment due to the gear movement.

•When lens shift setting (adjustment) is complet- ed, mount the lens shift cover to this unit.

Project a reference image on the screen

Remove the lens shift cover from the pro- jector

•Unscrew the knurled aluminium cover on the top of the projector. Note: Some units may have a smaller cover accessed via a hole in the top cover (see illustration). Remove this with a flat- blade screwdriver.

Adjust the projection screen position

•Turn the shift adjustment screw using a flat- blade screwdriver and adjust accordingly. Turn clockwise : Screen shifts upwards.

Turn anti-clockwise : Screen shifts downwards.

Re-fit the lens shift cover

It should be no more than finger-tight.

Lens Shift Cover

Shift Upwards

Shift Downwards

Shift Adjustment

Screw

Projection screen position image according to shift level

Approx. 60% (upward maximum)

Approx. 50% (default position)

Approx. 0% (downward maximum)

19

Image 19

Contents ILA 1080MF1 For Customer use FCC Information U.S.A. only Safety precautionsMachine Noise Information Germany only Product If in DOUBT, Consult a Competent Electrician Other Countries outside the European Union Maintenance ProceduresInformation for Users on Disposal of Old Equipment EU Only European UnionPage Contents Accessories Controls & Features Handling the Control Panel Cover AC Power Input SocketService Connector Rear & Right SideExit Button Rx/Tx IndicatorsControl Panel Menu ButtonTemp Indicator IndicatorsStandby Indicator Operate IndicatorLamp replacement Indicator Display TableTop panel indicators Control panel indicatorsOFF Button Remote ControlProjector/Processor Select buttons On ButtonLight Button Test Button main labelZoom Tele/Wide Buttons main labels 8 Installing the Projector View from the side Projector and Screen InstallationView from Above Wide T Tele Screen Size and Projection DistanceProjection screen position image according to shift level Lens Shift SettingAdjust the projection screen position Re-fit the lens shift coverInterfacing the Projector Connecting to DevicesConnecting a Video Processor Connecting a computer or Home Automation System via RS232Connecting the Power Cable Supplied Precautions During Use Adjusting zoom image size and focusTurning off the power Apply Mains PowerMenu Structure Adjustments and Settings Using MenusAfter setting is completed, press the Exit button Accessing the Menus Press the Menu buttonMenu Operation Buttons Red, Green, Blue Pixel AdjustSetup Menu Menu Position Color TempRC232C bps Power SaveOptions Menu Menu Display Sleep TimeAbout Lamp Replacement When the lamp usage time reaches 2010 hoursReplacing the Lamp Pull out the lamp unit Lamp Replacement Procedure Remove the control panel coverLoosen the screw and remove the lamp cover Loosen the screws on the lamp unit and lift up the handleRe-attach the lamp cover and fasten the screw Tighten the screws of the lamp unit and fold down the handleCleaning and Replacing the Filter On-screen warning messages For Nos About warning indicatorsPower up TroubleshootingPinouts RS-232C Port Interface SocketsDVI-D Interface RS-232C External Control Numeric value External control command tableSpecial parameters Specifications All dimensions in millimetres Projector Dimensions